I need some help , working on a different cva 2300 and the carb kit has several fuel pump diaphragms one is the fiber glass and one is smooth shiny black ,have not seen one of those before. Which one do I use and why. Thanks
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
stubnail67
Addicted to ArboristSite
as long as you match the pattern your should be good...got a pic of it?
stubnail67
Addicted to ArboristSite
I have seen them in black older ones blue clear plastic and a white /tan fiber material just match it ..i like the older black ones but I have been using the cheap chinese knock offs with no issues this past year....
stubnail67
Addicted to ArboristSite
I believe they made changes because of ethanol...
Passed on a 380 for 100 yesterday and then walk right into this today. I just couldnt say no to this one. 
Freaking other 2 tagged along with it.
Freaking other 2 tagged along with it.
stubnail67
Addicted to ArboristSite
thats a really nice pp
380 60 cc?
380 60 cc?
stubnail67
Addicted to ArboristSite
I hardly see them around here... if i do its beat to hell.....
redunshee
Addicted to ArboristSite
Where the heck do you find these saw? I'm jealous!
Yes 60cc. I passed on the 380 at 100 and shipping. Just have to many waiting right now in this series to be done too. 2 are 380's but not as nice.
Thinking it has a stuck ring or something else simple going by info and pics from owner.
You want me to get see if the guy will give me his email for ya?
Thinking it has a stuck ring or something else simple going by info and pics from owner.
You want me to get see if the guy will give me his email for ya?
stubnail67
Addicted to ArboristSite
this one came home with me the other day when i picked up the pp235....
2stroke_shaman
ArboristSite Guru
Ya no shite, were you the local dealer ? I look alot and the best i can find is a pp325.
Anyone have a walbro wt 309 carb from a 2300 . I need one
redunshee
Addicted to ArboristSite
325 is a great saw. Partner design if I recall.
Hey everyone. I'm working on a couple of later model Poulan 4000's and am in need of decals for the recoils and drive covers. These saws are more of a bright lime green color and have the lime green and black decals. I reached out to a Member here who'd made some years ago, but haven't heard back in a few weeks now. I'm open to suggestions or would happily purchase one or multiple sets for my saws. Let me know your thoughts or ideas, and thanks for any assistance. Best, Max.
Try this guy. Have his email here. http://chainsawrepair.createaforum.com/stickys-of-how-to-basics/decal-sticker-chainsaws-etc/
Beat me to it.
Steve
Steve
Thanks fellas, I'll check this out. Max.
stubnail67
Addicted to ArboristSite
My PP190 came in today best saw i have bought to date from Ebay stand up seller...... I went through the whole saw runs and cuts as it should... i did put a new 14 inch bar and chain on it ..... and tuned it to Florida's heat....I do not have one bad thing to say.... Seems like ebay has been a bust the last year never a saw just as described.....any ways here are the pics of this very cool micro series saw.....
It would probably cut faster with a Poulan Pro bar on it. [emoji28]
Steve
Steve
Lol!
