Air filter is on the way. Made a red neck choke lever for now. Robbed a clutch from a donor. Assuming I find a b&c in my inventory ( or as the wife calls it my junk pile) lol I may be putting it in some wood soon!
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Na, hoping someone would steal this guy's loud atv.
Steve from my moto g(7) play using Tapatalk
Just put that green plastic 46cc to work root cutting. Funny burying the 16" or so 3/8LP bar chain at least 10" or more in the dirt on purpose. 
Good use for that shark fin safety chains.
Older pic
Good use for that shark fin safety chains.
Older pic
I switched the PP335 over to 3/8 Carlton A1 chisel chain from .325 to see how it would cut. Does well.
Got the 295 running and cutting but not too impressed yet. Kinda doggy. Haven’t given up tho. Gonna check out the inside of the muffler and put the new air filter on when it gets here. It’s make shift at the moment and may be restricting it. Drive sprocket is kinda shot too.
a new sprocket, clutch, b&c would probably help but that’s a lot to sink in to it not knowing what the final outcome will be yet.
a new sprocket, clutch, b&c would probably help but that’s a lot to sink in to it not knowing what the final outcome will be yet.
Yeah, I find most Poulans respond well to a muffler mod or ripping the guts out. Careful the extra exhaust flow doesn't melt something like the case or break leaver though. Ask me how I know.
Hey, anyone see the guy selling OEM 3400/3700/4000 crankshafts on E-bay for 25 bucks?
Just wanted to show you what was on the door step the other day. Yes I got it and no I didn't pay full price. 
Good deal!! Glad you got it.
Todd, that's a very nice 5200! What size bar & chain do you plan to mount on it? How's the air filter? Good for you, and enjoy! Max.
I have a 30 bar that I'm thinking about using. The filter was starting to have some holes in the fuzz around the top so I put a new one on. The piston and cylinder are as new looking as I have seen. With this saw I now have 4 that are one owner and about as nice as can be found. 5200 5400 8500 and a 5.2
I like your focus and specialization! Outstanding! Max.
Nice looking saw Mr. Todd, congrats.
Steve from my moto g(7) play using Tapatalk
Steve from my moto g(7) play using Tapatalk
big10pointer
ArboristSite Operative
Howdy all,
I just purchased a 5400 and have a few questions
I need rings or a piston and rings is LRB piston and rings any good? Also will boysen reeds for pioneer work? If not where can I get material to make them? Is the carb governed? if so can it be bypassed? I'm goiong to remove base gasket and port it while I have it tore down.Thanks for any and all responses/info
I just purchased a 5400 and have a few questions
I need rings or a piston and rings is LRB piston and rings any good? Also will boysen reeds for pioneer work? If not where can I get material to make them? Is the carb governed? if so can it be bypassed? I'm goiong to remove base gasket and port it while I have it tore down.Thanks for any and all responses/info
First off glad you are a 5400 owner, it's my favorite. I have some rings. Second I have some reeds. Third carb is governed and can be fixed. What do you want to delete the base gasket for, don't think you will see gains that are worth it, might sound or feel different but I would not do it without trying it out first then make sure you aren't going to hurt it. Piston and cylinder are hard to find.
big10pointer
ArboristSite Operative
I'm not deleting the base gasket itself and expecting to notice it's going to get a good woods port including the carb and muffler thinking about building a short pipe so the base gasket delete will add to the total it has .055 squish now. Would you be willing to part with a set of rings? I will gladly pay you for them and shipping. Thanks
Yes I can let go of a set
Give me your address in a PM and we can go from there.
Give me your address in a PM and we can go from there.
I found a dead mouse in my 5200 muffler ,who had stored his decon in there. How much you gonna "port" it ? Dead rat size?
Craftsman 3.3 (18") that I have owned over 20 years.
MM, Oregon rim drive clutch drum.
Its... SMOOTH in the cut.
Muffler is off for sand blast & paint.
MM, Oregon rim drive clutch drum.
Its... SMOOTH in the cut.
Muffler is off for sand blast & paint.
