Odd sized Stihl seal???

[rupedoggy]

I put together a parts saw and got the old 066/064 crankshaft mated with a newer crankcase. The seal I need is 22mm outside and about 13 1/2mm inside. This is the flywheel side. Does anyone know of a seal (for any saw) that is that size? Mike

 

[Lakeside53]

any Stihl dealer can get it for you, and probaly has it in stock.

The OLD Crankcase seal is 13.5x20.4x4, part number 9640-003-1355, $13.55
The newer crankcase seal is 15x22x4, part number 9640-003-1560, $11.50

 

[rupedoggy]

If I did not make it clear for you I appoligize, those seals won't work. I appreciate you saying I can get it though. Do you have a part number? Mike

 

[MacDaddy]

Mike why dont you just turn a sleave for the crank and run the larger seal or make a sleave for the case and run the smaller seal

 

[rupedoggy]

That is what I will do if I can not find a seal. It is just easier to get the correct fit if I can. Mike

 

[PWB]

Just go into a good bearing shop and tell them what you need, give them the measurements, they'll tell you if it's available. Got a place like that here I'd recommend if you were close.
I'd take the crank and crankcase with me and get them to take thier own measurments.