realzed
ArboristSite Lurker
My new and yet to be used 261 is fitted with a 20" Rollomatic E bar and I'm wondering if I should crack the oil adjuster up a lot closer to 'Full' ON to compensate for the length over the usual 16" - 18" versions which I'm guessing the middle of the range markings on the oiler adjustment screw are mostly intended for..
I previously had a 290 which seemed to oil a 20" bar perfectly well without adjusting it past half way - but I'm not sure if the oil pump on a 261 version pumps out the same or lower amount since I read in a few sites where people have warned about poor oiling with the longer bars on similar models.
Any experiences or information is greatly appreciated.
Thanks - Randy
I previously had a 290 which seemed to oil a 20" bar perfectly well without adjusting it past half way - but I'm not sure if the oil pump on a 261 version pumps out the same or lower amount since I read in a few sites where people have warned about poor oiling with the longer bars on similar models.
Any experiences or information is greatly appreciated.
Thanks - Randy