Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[cobey]

Must be a day for working on vehicles. Been wanting to put a tach in Bumblebee for a while. Wanted to see what kind of RPM it's running down the highway, 3000. With 33 inch tires, Wow.

probably 4.10 gears

 

[Jeepsnchainsaws]

Here is that Clinton I got at the scrapper starting for the first time.

 

[Hedgerow]

I like this system..
Filled 4 more yesterday.
I need more tote cages..

 

[Hedgerow]

Rooster says it's time to get up...
Someone musta told him about the clocks springing forward..

 

[thinkrtinker]

Sunday's chicken dinner

 

[WKEND LUMBERJAK]

good morning all

 

[Hedgerow]

Mornin...

Had a neighbor drop off a husky 36..
After checking fuel lines and filter, I primed it and it fired right up.
Tuned, muffler opened, and sharp chain later, it's a decent running saw..
Is there a Poulan equivalent?

 

[WKEND LUMBERJAK]

Yes. And not sure which one.

 

[SteveSS]

View attachment 409762
I like this system..
Filled 4 more yesterday.
I need more tote cages..

Those totes do look pretty handy. How did you get them stacked? How do you like that light bar on the atv? Is it LED?

 

[Hedgerow]

Yes. And not sure which one.

Is it really only 36cc??
Seems more like a 42..

 

[Hedgerow]

Those totes do look pretty handy. How did you get them stacked? How do you like that light bar on the atv? Is it LED?

Stack em with forks on the tractor.

And yes, those are Levi's led's..
He can spot coons in a tree with em..
Use lotsa juice though..

 

[67L36Driver]

Here is that Clinton I got at the scrapper starting for the first time.

A carb kit and that will be barkin' at a more steady rate.

Morning midlanders!!!

 

[Jeepsnchainsaws]

A carb kit and that will be barkin' at a more steady rate.

Morning midlanders!!!

We are going through it completely, want to make it look like this one.

 

[Homelite410]

Afternoon boyz!

 

[workshop]

Hi Mike
Patiently waiting for the race to come on.

 

[67L36Driver]

Tore down the Hedge Deere.


There is an attendant gouge in the cylinder wall. Tramp material or wrist pin roller I think.

I do have a cylinder that might be serviceable but it ha a ding at the top of a transfer port from a big end rod roller. It's possible the rings will hang up on it.

 

[67L36Driver]

I have a NOS Remy 64302 piston on hand.

 

[WKEND LUMBERJAK]

Tore down the Hedge Deere.
View attachment 409909

There is an attendant gouge in the cylinder wall. Tramp material or wrist pin roller I think.

I do have a cylinder that might be serviceable but it ha a ding at the top of a transfer port from a big end rod roller. It's possible the rings will hang up on it.

That should buff out.

 

[Hedgerow]

That's an impressive gouge..!!

 

[Jeepsnchainsaws]

That's an impressive gouge..!!

It is a nasty one, I have seen a lot just like that.
Every time I get a saw out of the scrap I expect t see that, but cross my fingers.