Yup, got it confused with the Jonsered.
There are some on evilbay. High dollar. Yikes!
There are some on evilbay. High dollar. Yikes!
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Good afternoon. Been really busy here, had a few pages to read to get caught up. Hope all is well with everybody.
Matt, what is that off of and what kind of chain?
Hedgerow
HACK
Levi's John Deere that Randy built...
3/8 square filed chain...
Oliver1655
Addicted to ArboristSite
So will Levi be able to prove "Nothing Runs Like A Deere"? Inquiring minds what to know. Tune in next week to find out, or is the week after???.
Hedgerow
HACK
Piston w/rings arrived this am so now the Jonnyred is a runner again.
Sod did the Echo 300EVL. It needs a new sprocket/drum but someone must have lost the L.H. metric nut as it has an off the wall job brazed on. Damn farm fix.
Good thing we have an acetylene outfit...........................
Sod did the Echo 300EVL. It needs a new sprocket/drum but someone must have lost the L.H. metric nut as it has an off the wall job brazed on. Damn farm fix.
Good thing we have an acetylene outfit...........................
cobey
Addicted to ArboristSite
the little 300evl's are cuteYou better hope the coil is good on the 3000, because ole Jim doesn't have any extras. I need 1 or 4 myself.
WKEND LUMBERJAK
Addicted to ArboristSite
sounds like everyone had a good day.
cobey
Addicted to ArboristSite
some angry saws up there!
gritz
ArboristSite Guru
Hey, just dropping a line to intrduce myself. I'm in the Liberty, MO area and don't really know many saw fanatics close. I mainly mess around with eh 1121 series Stihls (026 primarily) and anything that comes across my bench on Saturdays. (Can't work on chainsaws for a living, yet. Still have a day and sometimes into the night job through the week). Take care.
WKEND LUMBERJAK
Addicted to ArboristSite
gritz welcome I live on the other side of the state line in Tonganoxie Ks. there are several other's within an hour of you.
Oliver1655
Addicted to ArboristSite
Welcome Gritz
WKEND LUMBERJAK
Addicted to ArboristSite
Hey John.
Liberty to Joetown is 45-50 minutes. Mo.Jim is just 7 miles south of town.
Try lunch at Steak and Shake or visit the Corner Cafe west end of Liberty.
Try lunch at Steak and Shake or visit the Corner Cafe west end of Liberty.
I think I'll just fire up the Echo and hold a file to the brazed area. Just like a lathe.
Homelite410
Hack with a CNC Mill
Welcome gritz! I'm from Iowa but they all still put up with me! Great group of guys on this thread!
Homelite410
Hack with a CNC Mill
12,000 rpm lathe! [emoji23]
cobey
Addicted to ArboristSite
welcome!! good to meet you
More like on idle speed using my Dremmel with a stone counter-rotating.
Heat to melt the braze would likely kill the crank seal.
Not to mention the danger of burning down the saw plus the garage and the house from the gas fumes......................
