bump!
stop on by the GTG thread for an update.
http://www.arboristsite.com/showthread.php?t=65889
:censored:
stop on by the GTG thread for an update.
http://www.arboristsite.com/showthread.php?t=65889
:censored:
OOHHH! how the mighty 361 hath 'fallen!
- Thread starter wanab
- Start date
Help Support Arborist Forum:
huskystihl
Addicted to ArboristSite
just so you know that 361 in my video is a runner. so yes i may try and bring it just to show you its not a weak 361 but i know thats not saying much.
this is killing me! I have been reading this for a while now and been cutting for even longer with an 044. when will this stop?
maybe i slow tonight, help me out. the 361 i ran in the video and @ the GTG seemed very close in performance to the one 2K ran @ the GTG.
????
Nate Surveyor
ArboristSite Lurker
Now, I have not run either saw.
But, from my experience with 2 stroke motors, good ones take a long time to break in.
And, if you are comparing a similar size motor, I'd assume that the more broken in one would win.
I like flying model airplanes. And they are finicky about break in period.
You don't count hours until they are broken in, but characteristics. One will break in in 2 hrs run time, and another will break in in 6 hrs.
Same motor, by outside appearances.
Nate
But, from my experience with 2 stroke motors, good ones take a long time to break in.
And, if you are comparing a similar size motor, I'd assume that the more broken in one would win.
I like flying model airplanes. And they are finicky about break in period.
You don't count hours until they are broken in, but characteristics. One will break in in 2 hrs run time, and another will break in in 6 hrs.
Same motor, by outside appearances.
Nate
Ole Farmerbuck
Addicted to ArboristSite
Well lets see the vids! What was the outcome?
Last edited:
Ole Farmerbuck
Addicted to ArboristSite
Bring that frickin' 361 that you run so I can tune it. You will never touch ole reddy again.
Well wanab, does your 361 run better now?
stevethekiwi
Addicted to ArboristSite
balls. id put one of my new 346's (50cc) against against any broken in 60cc poulan / homelite / ryobi / talon you can find.
lol i love my 346's
2000ssm6
Stihl User
We were not worried about any of the 361s running bad, the 621 didn't want to play well with the others though. I was happy to see it make the good passes it did.
didnt want anybody to miss the outcome of this one so here ya' go.
2000ssm6 361 stock 20" bar
time was 14.6 in 16"-18"
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/90svhp5j6LY&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/90svhp5j6LY&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>
*********
wanab stock bruised, battered and drunken Redman 621 MS361 killer 20" bar
time was 12.9 sec. in 16"-18"
<object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/KaYQuxKNmV0"> </param> <embed src="http://www.youtube.com/v/KaYQuxKNmV0" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>
RIP! MS 361
there is a new or should i say old sherriff in town.
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/Q7C90sLh5Ok&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/Q7C90sLh5Ok&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>
SawTroll
Information Collector
Well, the other 361 made it in 11.7, and the NE346xp and an 044 in 13.0....
....tells me that there were a lot of variables in addition of the saws capability involved in that cutting session, some of which have already explained, some not......:greenchainsaw:
..but I am sure it was fun.....
Last edited:
ropensaddle
Feel Lucky
Lol and it is not even husky lol
SawTroll
Information Collector
ropensaddle
Feel Lucky
It sort of is, as Husky has owned Redmax for some time......
Yeah I know just not thorough bread :monkey:
SawTroll
Information Collector
Sure enough, it lacks a lot in design (features) and quality - but this is not the first time it is reported as a good runner..........
Coloradobum
ArboristSite Operative
Well, I'm not surprised at at the outcome at all. I have 2 Redmaxes now (4000 and 5000), and they are shockingly strong runners for their size. I get to try out a 346XP this weekend so we'll see how the 5000 stacks up. People questioning the quality of these saws are talking out of their :censored:, most have never even run one.
And you just drug up a 2 1/2 year old thread, lol.
Coloradobum
ArboristSite Operative
Stihlman441
Addicted to ArboristSite
That pic of two saws humping.
Not a good idear trying to breed with two differant brands,end up with barsteds.........................
Not a good idear trying to breed with two differant brands,end up with barsteds.........................
