P&C interchange guide

[Mr. Woodcock]

Does anyone have the stroke specs on the current pro saws from both husky & stihl? 026/260, 036/360, 361, 044/440, 046/460, 064/066/660, 346,357,372,385,395 and the dolmar/makita stuff

 

[isaaccarlson]

will any of the bigger stihl tops fit a 390?

or do they mount up different?

 

[TommySaw]

Does anyone have the stroke specs on the current pro saws from both husky & stihl? 026/260, 036/360, 361, 044/440, 046/460, 064/066/660, 346,357,372,385,395 and the dolmar/makita stuff

346-1.28''
357-1.34''
372-1.42''
385-1.46''
395-1.50''

source-husqvarna website

 

[JT78]

The 066/660 wrist pin will work in a Husky 359 for less weight on the rotating assembly.

 

[Moss Man]

Husky 50/51/55 (some of the 50's that is).

 

[Bowtie]

or do they mount up different?

Stihl 390 or Husky 390? If Stihl, then no.

 

[splitpost]

or do they mount up different?

stihl290,310,390 will all interchange<clamshell design engine,pro saws very different won't fit

 

[splitpost]

Stihl 390 or Husky 390? If Stihl, then no.

i would say stihl its in the title

 

[tdi-rick]

Dolmar 6400, 7300, 7900 / Makita DCS6401, 7301, 7901 and Solo 681 all can use the same P/C.

http://www.baileysonline.com/itemdetail.asp?item=BBN 7900

Not quite that simple, but close.
The Dolmar/Makita's cylinder is shorter than the Solo, (the Solo uses a longer stroke) so if you fit a Dolmar P&C to the Solo the psiton will crunch the head rather badly, unless you add a spacer (as Baileys do with their kits)

 

[fredmc]

Ill anything bolt onto a 357xp?

359

 

[SawTroll]

Don't forget the 2149 & 351. On a side note all will interchange with each other! The carbs are different between the new & old, the new ones have the purge bulbs, but thats easy enough figured out.

That is true. :agree2:

 

[SawTroll]

Husky 50/51/55 (some of the 50's that is).

Some of is the key here, most 50s interchange with the P5000/500 and Jonsered 490, and not with the 55/51 - as I understand it (I am no expert on these saw models).

 

[gemniii]

Any interchanges for Efco Mt3600 or Efco 162?

 

[Mr. Woodcock]

346-1.28''
357-1.34''
372-1.42''
385-1.46''
395-1.50''

source-husqvarna website

do you have that in mm?

 

[Mr. Woodcock]

Does anyone have anymore?

 

[logging22]

Well, i can tell you that the 288, 660 swap dont work, even with the 460 pin. Dont know what info i got, but it dont work.


Les

 

[kevlar]

Well, i can tell you that the 288, 660 swap dont work, even with the 460 pin. Dont know what info i got, but it dont work.


Les

066 piston and wrist pin, 460 bearing.

 

[SawmillTroy]

On Bailey's it shows that my 570 with 49mm bore will fit the 575 p&c 51mm. Both saws have 36mm stroke. I just got mine delivered so I will find out how everything fits soon. Hopefully this works awesome!

http://www.baileysonline.com/itemdetail.asp?item=537+25+41+02&catID=383

 

[Mad Professor]

do you have that in mm?

Multiply by 25.4 mm/in.

 

[Jtheo]

Lots of very good information here. Thanks guys