cjnspecial
ArboristSite Guru
Picked up a few saws over the last few weeks all from different sellers.... a MS200T, 064 and 394XP.
The guy with the 200T didn't know why the saw would't run right and was selling it for $250. All it was was the bar spocket was so worn, the chain was binding in it. I didn't try to negotiate because my 200t wasn't running right(more later on this) and he had just got laid off. Worked out good for both of us.
Despite it's looks, 064 has gobs of compression and starts on the 3rd or 4th pull from dead cold-$250. All it needed was an oil feed line. Also came with a few extra dull chains and a 24 inch bar.
The 394 is in perfect shape, came with a 28 inch bar-$350. Can't wait to cut side by side with the DP066...:greenchainsaw:
The guy with the 200T didn't know why the saw would't run right and was selling it for $250. All it was was the bar spocket was so worn, the chain was binding in it. I didn't try to negotiate because my 200t wasn't running right(more later on this) and he had just got laid off. Worked out good for both of us.
Despite it's looks, 064 has gobs of compression and starts on the 3rd or 4th pull from dead cold-$250. All it needed was an oil feed line. Also came with a few extra dull chains and a 24 inch bar.
The 394 is in perfect shape, came with a 28 inch bar-$350. Can't wait to cut side by side with the DP066...:greenchainsaw: