Want to Buy Pioneer Farmsaw

[ceptor]

I am in need of a starter pulley for my farmsaw. The plastic cog has malfunctioned. Could someone please help

 

[chainmaster]

what is that you need i have some parts where in Canada are you

 

[ceptor]

I want to thank you for your response. I found the starter pulley and cog at chaimsawr's web site. I have been looking for a long time. I got the saw running fine tuned the carb. started cutting and it died just like it ran out of gas. Does any one have any suggestions as to why this would happen.

 

[chainmaster]

it looks like it might be you ignition coil these coils are prone to go bad check for spark

 

[ceptor]

spark is good a d I replaced the coil with a new brand new one. It runs like a top untill it is put under load. would a the reed valve cause tbis?

 

[chainmaster]

could be you high fuel screw try to adjust 1/8 turn in or out i find one full turn back from full setting

 

[ceptor]

what do you mean from full setting. It is about 1 and a quarter turn when set running well under no load.

 

[chainmaster]

that's about right what i met to say screw all in then screw back out one full turn so one 1/1/4 is about right

 

[chainmaster]

check the compression valve maybe the lever is pushing a little open

 

[ceptor]

ok will check thanks