Placing Cannon order...who is in and what do you want? Echo and Husky bar adapters as well

Wesspur
Shop deals on ebay
Rugged made
Advertise with us
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
fordf150

fordf150

ArboristSite.com Sponsor
Sponsor
Joined
Mar 20, 2013
Messages
3,393
Reaction score
6,206
Location
ohio
For those that dont know. Cannon is now making adapters for P4(8mm) to S1(12mm) allowing Echo saws to accept a Stihl mount bar. They should be released for sale in 3 weeks or so and my plan is to place an order first of next week. So for anyone wanting Cannon bars or adapters let me know what you want and I will add it to the order. Please be patient with me on this since this is my first time doing anything like this.
These are the list prices for Cannon so if we get to a 20 bar order we will do 15% off list plus shipping.
Bar adapters
S1(12mm) to H1(9mm) $6.76
S1(12mm) to P4(8mm) $6.76

Cannon SuperBar Pricing
16" $86.23
18" $95.42
20" $103.59
22" $111.84
24" $121.01
28" $140.84
30" $146.85
32" $154.86
33/34" $162.25
36/37" $174.57

Bar Tips for SuperBar are $15.10
 
Are the Cannon bars Stihl mount?

Ill take (3) P4 and (1) H1 please. Let me kniw where funds go, may be in for a bar or two pending previous answer, thank you again for this.
 
cannon bars are set prices for a given length bar. most bars are available in
.050, 058, 063 gauge
.365, .325 , .375, .404

bar mounts for cannon bars are a kind of universal
C1 replaces k041, a041, a095, k095
H1 replaces D009
S1 replaces D025
S2 replaces D033, E033, E031
P4 replaces D176.....These are the Echo mount bars and take standard Echo DL counts

Just let me know what pitch, gauge, length, and mount you want and i will get the part number figured out for it.
 
here is the Cannon application guide. I will try to find the bar mount chart and post a link for anyone that isnt familiar with Cannon.
 

Attachments

  • PriceListMSRPUSDJune2014.pdf
    449.3 KB · Views: 37
fordf150 said:
P4 replaces D176.....These are the Echo mount bars and take standard Echo DL counts

Just let me know what pitch, gauge, length, and mount you want and i will get the part number figured out for it.
Click to expand...

Are you sure about the dl counts? Cannon often lists non-stardard ones in the other mounts.....

Edit, Cannon lists the standard D009/D025 dl counts on the H1 and S1 bars in 20 and 24/25" - but often not with other Husky/Stihl configurations.
 
SawTroll said:
Are you sure about the dl counts? Cannon often lists non-stardard ones in the other mounts.....
Click to expand...
I am going by what they told me last week when i called in. 70DL for a 20" and 81DL for 24" bars. They do not have them listed in their catalog yet.
 
*STUPID QUESTION*

If I run a 24" Stihl bar on the Echo do I use Echo or Stihl DL counts?

Thanks
 
BGE541 said:
*STUPID QUESTION*

If I run a 24" Stihl bar on the Echo do I use Echo or Stihl DL counts?

Thanks
Click to expand...
Stihl. Thats part of the appeal of using an adapter on the Echo saws....getting rid of their odd DL count and switching to something common
 
No idea - but I'm happy to count the 325 nose that I have if that's of interest.
I'll see if I have anything with a 3/8lp nose with the same profile.
 
fordf150 said:
I am going by what they told me last week when i called in. 70DL for a 20" and 81DL for 24" bars. They do not have them listed in their catalog yet.
Click to expand...

Ran into that exact thing today with a poulan branded but husky large mount bar in 24 inch, takes 81 drive links, not the standard 84.

Dang, maybe should have waited, but already scored a new bar today. Next time! Those cannons look good! GLWS man!
 

Latest posts

Back
Top