drf255
BAD CAD
262 for sale with extra HDA87 Carb. Ported by yours truly.
20" Oregon bar with new Oregon chain
OEM Jug w Decomp
New Meteor and caber
Squish .021
HDA120 Carb on
Extra 87 carb w rebuild kit (needs it)
Numbers are 103/116(lip)-118/74
Muff modded
Timing advanced
Squish cut .039 and base cut to squish set
New:
Absorber (front fly AV mount)
Side AV mount
Seal and flywheel O ring
Rim sprocket
Fuel line and filter
Plug
Coil lead
Fully cleaned
Flywheel and jug exterior glass beaded
$550+ shipping
Note,
I cannot ship this saw until after January 4th, so if you buy it, it will sit till then.
The 87 carb needs a rebuild but was clean when I pulled the covers off.
Toggle on ignition switch is broken off.
Currently at 235psi cold and 215 warm.
This is an old saw and I did my best to fix everything it needed. It runs very well, but has the usual scratches, etc...
PayPal friends and family.
20" Oregon bar with new Oregon chain
OEM Jug w Decomp
New Meteor and caber
Squish .021
HDA120 Carb on
Extra 87 carb w rebuild kit (needs it)
Numbers are 103/116(lip)-118/74
Muff modded
Timing advanced
Squish cut .039 and base cut to squish set
New:
Absorber (front fly AV mount)
Side AV mount
Seal and flywheel O ring
Rim sprocket
Fuel line and filter
Plug
Coil lead
Fully cleaned
Flywheel and jug exterior glass beaded
$550+ shipping
Note,
I cannot ship this saw until after January 4th, so if you buy it, it will sit till then.
The 87 carb needs a rebuild but was clean when I pulled the covers off.
Toggle on ignition switch is broken off.
Currently at 235psi cold and 215 warm.
This is an old saw and I did my best to fix everything it needed. It runs very well, but has the usual scratches, etc...
PayPal friends and family.