Firewood Bandit
ArboristSite Lurker
Trying to help my dad find an exhaust for his Pro Mac 55. He bought it new when he was 16 in the ... 1970's?!? Any suggestions on parts source that would ship to Canada?
Pro Mac 55?
- Thread starter Firewood Bandit
- Start date
-
- Tags
- pro mac 55
Help Support Arborist Forum:
Any 10 series muffler should fit. Does that have the reed muffler or standard?
ML12
ArboristSite Guru
Up here (in BC) they are fairly common, unless you need it immediately, your best bet is likely to find another saw on craigslist. Shipping from the states is brutal. I usually have things shipped to a US mailbox then drive down and get them.
Be careful regarding "any 10 Series", you need to find a muffler & gasket from one of the Pro Mac 10-10 or any of the 57-70 cc saws (PM55, 555, 570, 10-10S, SP60, CP70, SP70, 7-10, PM700). The bolt pattern and muffler gasket profile changes from the earlier models or the 82 cc versions.
Mark
Mark
Firewood Bandit
ArboristSite Lurker
All good suggestions. I don;t know much about McCulloch saw at all. If its a reed muffler or not I could not say. I see a McCulloch 10 10 automatic close by me for sale. If I understand correctly the exhaust on this saw will fit my dads Pro Mac 55
Firewood Bandit
ArboristSite Lurker
This is the saw for sale that I'm hoping is compatible with my Dad's 55
Thank you for setting me straight!
The muffler on that one will not be the same. You need to find a later model Pro Mac 10-10 or one of the other saws noted above.
Mark
Mark
Firewood Bandit
ArboristSite Lurker
Ok thanks for the info guys. At least I know what I'm looking for now.
Yotaismygame
Juiced Saws #GetJuiced
I’ve got a 10-10 muffler...
Ebay is a pretty good source for parts but be sure you know what you need...I have a pro mac 55 that also needs a muffler but it needs a few other parts as well so it's gonna sit for awhile..
Yotaismygame
Juiced Saws #GetJuiced
I’ll sell this 55..
