mwiles629
New Member
I recently purchased a Poulan 18" saw. I used it about 4 hours cutting wood that has been laying around for about 2 years. I had no problem with it, I cut alot of wood and the chain I believe went dull, it was no longer cutting good. So I went out and bought a new chain, an Oregon chain. The new chain I only used half hour to maybe an hour. Then same thing, no longer was cutting good, in fact it was hardly cutting at all. I did let the chain run at a slow speed for about 5 minutes before cutting and there's plenty of bar oil coming out, and the chain tension is good. Whats causing the chain to go bad so quickly? Any suggestions or a better chain I can get?
Thanks,
Michael
Thanks,
Michael