Raffle For AS Member "hoskvarna"

[Paragon Builder]

Jeremy took hedgerow's chain. Marcello @ boozer is up. I sent him a text.


Sent from my iPhone using Tapatalk

 

[Plowboy83]

Plowboy...PM me your contact information i.e. Your physical name, mailing address, so I can pass it on to Deets. He's not on this site anymore...I'll make damn sure he gets the shipping info for your saw. Send your contact info via PM...not over the open airwaves.

Ok I'm on it

 

[sarahdodgegeek]

Boozers up

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum) Picked By Deets066
2. Deets066 Ported 046 picked by Mr. Brinkley
3. 1- 60DL .050 Race/GTG chain (Hedgerow) pick by Jeremy

1. Husqvarna s2800 splitting ax (tlandrum)
2. Free woods port (Miller Mod Saws)
3. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
4. Service to dress a bar (SquareFile)
5. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder)
6. Brand new fiskars x25 axe. (sawmikaze)
7. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
8. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
9. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
10. Free saw porting job. (jmssaws)
11. Stihl 056 AV powerhead only. (Gary Courtney)
13. Wilton Bash 6# Splitting Maul (svk)
13. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
14. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
15. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
16. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder)
17. New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
18. Slightly used hard-nosed Mac bar, 24" .063 p/n 652774 XB NOS. (Metals406)
19.Choice of: Fiskars X27 Axe, Fiskars X25 Axe, or 30" Logrite Hookaroon (USMC615)
20. Brand new 25" Stihl ES Bar and .050 full-skip chain (StihlKrazy)
21. Stihl 33RS (3/8 0.050) chain, winner names the DLs up to 114 (ctylerc1995)
22. Oregon bar 114 dl fits Stihl 440 460 660 661 .050 gauge. (dolmarkid)
23. Husqvarna 61 case w/ crank
24. Wiha tool set from Roadfxr

 

[Paragon Builder]

He's out to dinner with his wife. He said he'll be home in 20 to get online...


Sent from my iPhone using Tapatalk

 

[USMC615]

Ok I'm on it

I will PM Deets the same info. Not across the open forum, for your privacy.

 

[Boozer]

Sorry to hold up the line folks. I'm gonna go for Dan's generous offer of a spicy Husqvarna 262!
Carry on!

 

[USMC615]

Sorry to hold up the line folks. I'm gonna go for Dan's generous offer of a spicy Husqvarna 262!
Carry on!

You dog...enuff said. Lol. Aside from the 461, that's the ticket right there.

 

[sarahdodgegeek]

Jon Fluharty is up
1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum) Picked By Deets066
2. Deets066 Ported 046 picked by Mr. Brinkley
3. 1- 60DL .050 Race/GTG chain (Hedgerow) pick by Jeremy
4. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder) picked by boozer


1. Husqvarna s2800 splitting ax (tlandrum)
2. Free woods port (Miller Mod Saws)
3. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
4. Service to dress a bar (SquareFile)
5. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder)
6. Brand new fiskars x25 axe. (sawmikaze)
7. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
8. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
9. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
10. Free saw porting job. (jmssaws)
11. Stihl 056 AV powerhead only. (Gary Courtney)
12. Wilton Bash 6# Splitting Maul (svk)
13. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
14. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
15. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
16. New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
17. Slightly used hard-nosed Mac bar, 24" .063 p/n 652774 XB NOS. (Metals406)
18. Choice of: Fiskars X27 Axe, Fiskars X25 Axe, or 30" Logrite Hookaroon (USMC615)
19. Brand new 25" Stihl ES Bar and .050 full-skip chain (StihlKrazy)
20. Stihl 33RS (3/8 0.050) chain, winner names the DLs up to 114 (ctylerc1995)
21. Oregon bar 114 dl fits Stihl 440 460 660 661 .050 gauge. (dolmarkid)
22. Husqvarna 61 case w/ crank
23. Wiha tool set from Roadfxr

 

[Paragon Builder]

Sorry to hold up the line folks. I'm gonna go for Dan's generous offer of a spicy Husqvarna 262!
Carry on!

Don't forget @Yukon Stihl donated the saw! I'm just rebuilding and porting it.

 

[Paragon Builder]

Jon took the porters starting set.
Mike Gott is up!


Sent from my iPhone using Tapatalk

 

[sarahdodgegeek]

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum) Picked By Deets066
2. Deets066 Ported 046 picked by Mr. Brinkley
3. 1- 60DL .050 Race/GTG chain (Hedgerow) pick by Jeremy
4. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder) picked by boozer
5. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder) picked by Jon F.


1. Husqvarna s2800 splitting ax (tlandrum)
2. Free woods port (Miller Mod Saws)
3. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
4. Service to dress a bar (SquareFile)
5. Brand new fiskars x25 axe. (sawmikaze)
6. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
7. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
8. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
9. Free saw porting job. (jmssaws)
10. Stihl 056 AV powerhead only. (Gary Courtney)
11. Wilton Bash 6# Splitting Maul (svk)
12. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
13. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
14. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
15. New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
16. Slightly used hard-nosed Mac bar, 24" .063 p/n 652774 XB NOS. (Metals406)
17. Choice of: Fiskars X27 Axe, Fiskars X25 Axe, or 30" Logrite Hookaroon (USMC615)
18. Brand new 25" Stihl ES Bar and .050 full-skip chain (StihlKrazy)
19. Stihl 33RS (3/8 0.050) chain, winner names the DLs up to 114 (ctylerc1995)
20. Oregon bar 114 dl fits Stihl 440 460 660 661 .050 gauge. (dolmarkid)
21. Husqvarna 61 case w/ crank
22. Wiha tool set from Roadfxr

 

[Boozer]

My gratitude to Mr. Yukon Stihl as well. My 181se has a brother now!

 

[sarahdodgegeek]

After Mike, here's the on deck:

7. Todd Kinneston
8. Ross Claypool
9. Jose Wengerd
10. Marvin & Karen Hoskey

 

[USMC615]

Sarah, ...you're doing a fantastic job keeping up with this...keeping everything updated throughout the process. Hats off to ya gal...

 

[sarahdodgegeek]

It'll all go to heck when I pass out for the night, but thanks!!!

 

[sarahdodgegeek]

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum) Picked By Deets066
2. Deets066 Ported 046 picked by Mr. Brinkley
3. 1- 60DL .050 Race/GTG chain (Hedgerow) pick by Jeremy
4. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder) picked by boozer
5. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder) picked by Jon F.
6. Free saw porting job. (jmssaws) picked by Mike Gott


1. Husqvarna s2800 splitting ax (tlandrum)
2. Free woods port (Miller Mod Saws)
3. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
4. Service to dress a bar (SquareFile)
5. Brand new fiskars x25 axe. (sawmikaze)
6. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
7. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
8. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
9. Stihl 056 AV powerhead only. (Gary Courtney)
10. Wilton Bash 6# Splitting Maul (svk)
11. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
12. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
13. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
14. New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
15. Slightly used hard-nosed Mac bar, 24" .063 p/n 652774 XB NOS. (Metals406)
18. Choice of: Fiskars X27 Axe, Fiskars X25 Axe, or 30" Logrite Hookaroon (USMC615)
19. Brand new 25" Stihl ES Bar and .050 full-skip chain (StihlKrazy)
20. Stihl 33RS (3/8 0.050) chain, winner names the DLs up to 114 (ctylerc1995)
21. Oregon bar 114 dl fits Stihl 440 460 660 661 .050 gauge. (dolmarkid)
22. Husqvarna 61 case w/ crank
23. Wiha tool set from Roadfxr

Todd K- what would you like?

 

[sarahdodgegeek]

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum) Picked By Deets066
2. Deets066 Ported 046 picked by Mr. Brinkley
3. 1- 60DL .050 Race/GTG chain (Hedgerow) pick by Jeremy
4. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder) picked by boozer
5. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder) picked by Jon F.
6. Free saw porting job. (jmssaws) picked by Mike Gott
Husqvarna s2800 splitting ax (tlandrum) Picked by Todd K.


1. Free woods port (Miller Mod Saws)
2. 2 - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
3. Service to dress a bar (SquareFile)
4. Brand new fiskars x25 axe. (sawmikaze)
5. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
6. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
7. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
8. Stihl 056 AV powerhead only. (Gary Courtney)
9. Wilton Bash 6# Splitting Maul (svk)
10. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
11. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
12. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
13. New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
14. Slightly used hard-nosed Mac bar, 24" .063 p/n 652774 XB NOS. (Metals406)
15. Choice of: Fiskars X27 Axe, Fiskars X25 Axe, or 30" Logrite Hookaroon (USMC615)
16. Brand new 25" Stihl ES Bar and .050 full-skip chain (StihlKrazy)
17. Stihl 33RS (3/8 0.050) chain, winner names the DLs up to 114 (ctylerc1995)
18. Oregon bar 114 dl fits Stihl 440 460 660 661 .050 gauge. (dolmarkid)
19. Husqvarna 61 case w/ crank
20. Wiha tool set from Roadfxr

Ross- what would you like?

 

[sarahdodgegeek]

1. New MS461R ported by Mastermind w/ 28'' total super bar /2 chains ( many members, Mastermind and tlandrum) Picked By Deets066
2. Deets066 Ported 046 picked by Mr. Brinkley
3. 1- 60DL .050 Race/GTG chain (Hedgerow) pick by Jeremy
4. 262XP Rebuilt by paragonbuilder (Yukon Stihl / paragonbuilder) picked by boozer
5. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder) picked by Jon F.
6. Free saw porting job. (jmssaws) picked by Mike Gott
7. Husqvarna s2800 splitting ax (tlandrum) Picked by Todd K.
8. 2-New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
Picked by Ross



1. Free woods port (Miller Mod Saws)
2. Service to dress a bar (SquareFile)
3. Brand new fiskars x25 axe. (sawmikaze)
4. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adirondackstihl)
5. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
6. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
7. Stihl 056 AV powerhead only. (Gary Courtney)
8. Wilton Bash 6# Splitting Maul (svk)
9. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)
10. (2) Brand New - Dolmar PS-6400 - PS-7910 Clutch Covers (166)
11. New Take Off - Dolmar PS-9000/9010 Full Wrap Handle Bar (166)
12. New 20" Husqvarna large mount Techlite bar and Oregon LGX chain (ny15)
13. Slightly used hard-nosed Mac bar, 24" .063 p/n 652774 XB NOS. (Metals406)
14. Choice of: Fiskars X27 Axe, Fiskars X25 Axe, or 30" Logrite Hookaroon (USMC615)
15. Brand new 25" Stihl ES Bar and .050 full-skip chain (StihlKrazy)
16. Stihl 33RS (3/8 0.050) chain, winner names the DLs up to 114 (ctylerc1995)
17. Oregon bar 114 dl fits Stihl 440 460 660 661 .050 gauge. (dolmarkid)
18. Husqvarna 61 case w/ crank
19. Wiha tool set from Roadfxr

Jose - what would you like?

 

[sarahdodgegeek]

On deck, Marvin & Karen Hoskey

 

[hoskvarna]

Marvin will take the 20in techlite bar.