I took a quick look just before leaving for work this morning, seen 16 things in a couple of mins that aren`t OEM,some of these may have already been posted by now.
1, OEM chain catcher missing.
2, Phillips head screws holding the AV mounts.
3, Flat head slotted screws usually hold the front handle to the fuel tank extension lower front/bottom.
4, Rear handle where it joins the fueltank on the bottom has no cross webbing.
5, Fuel tank seam is welded not joined as OEM.
6, Oil tank cap is incorrect.
7, Grille on the muffler is wrong.
8, Aftermarket felling dawgs, no chain catcher.
9, Pull cord handle appears to be hollow, not OEM.
10, The hole for the heated handle switch is missing the OEM plug.
11, There is a rectangle below where the front top handle joins the fuel tank, there should be a circle in it with the build date indicated.
12, The recess between the carb adjusters and the rear handle is not correct.
13, Decal for the master control switch on airfilter cover is a poor copy, not OEM.
14, The top decal is not correct for the magnum, the badge would have the 038 AV Magnum on it, not the magnum decal separate.
15, Many of the screws appear to be other than T27
16, What is the black circle or hole in the top engine shroud on the clutch side showing just above the slope of the front handle.