Saw Fest Ohio

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Cheap saw build off is MS170 017 saws.
Must be stock bore and stroke.
Anything goes for that class for alky, gas, NOS, Piped etc.
Even chain this year too. square or round and can be what whatever you want to run on it. Only this class.

325 round still on 55cc they said and 3/8 on rest of classes.

GL if you attend. They do limit the amount of people as it has grown to big. Like 60 competitors I think now and like 100-150 allowed to attend.
 
Sawfest 2023 Eric said sign up started for competitors. Only 50 competitors for classes. 20 slots left.

Email him with your choices of classes to enter.

Starts on Fri-Sat Oct 13th 14th Marysville Ohio 43040

Please list the event’s you are participating in. All of Saturday’s competitions are done on a points system. The more your in the more points you get. The list of competitions are pinned at the top in the announcements. Only the competitors need to email.


Eric
Competitor registration is now open. Please list the event’s you are participating in. All of Saturday’s competitions are done on a points system. The more your in the more points you get. The list of competitions are pinned at the top in the announcements. Only the competitors need to email. We have 50 spots to fill on the roster.

Saw classes for this year will be 55-65-85cc. Seems a lot of you was split between 3-4-5 cube and 54-64-84cc. We are going to stick to are roots and keep it firewood saw with cc classes. Same rules apply as previous years. No race gas or race saws. No pipes or homemade mufflers they must have factory looking mufflers. Chain is round file or grind no square file chains.
In addition to this announcement we are doing a dollar cut log. This is a 50/50 competition. Single cut best time win’s half the pot. Saws must be in compliance with the saw fest rules. No square grind, pipes, race saws, or race gas(nitro, methane alcohol). Run whatever cc you please up to 94cc

Friday October 13th Test and Tune 3:30-5:30 pm followed by clone wars at 6:00pm you must run both the 660 and 372 in order to be eligible for the prize saw. Trophies will be awarded on Saturday. The wild thing shootout (stock bore & stroke) will follow the clone competition. Saturday October 14th start time will be 9:00am. Classes for Saturday (Not in order) 55-65-85cc saw classes. Barrel split-pole saw race (Pole saw is provided). Limbing contest (saw of your choice) ms170(stock bore & stroke) cheap saw shootout.
Rules for this year. No two piece head on any saws. This is still a firewood saw competition. All regular saw class must run on pump gas including clones. No race fuel methanol, nitro, methane nitro, propane, or alcohol. Must have stock appearing muffler. No pipes homemade mufflers  or expansion chambers. You cannot share saws in these competitions. You must run your own saws. (no sharing of saws) The cheap saw shootout and wild thing classes are excluded from those rules.
The clone wars and cc classes must have chain brakes on them. They don’t have to function, but must be on the saw. Felling dogs are optional in all classes. Bar and chain requirements. Clone wars-660 must run a 24” round file chain. 372 must run a 20” round file chain. Saturday cc classes 55cc- must run a .325 round file chain. 65-85cc 3/8 round file chain. I do recommend at least a 24” bar for the 85cc class. Wild thing must be a 3/8 lp round file chain. Cheap saw shootout 170 is both round or square file. All classes up to 65cc with be cutting 8x8 or 9x9 cants. Larger cc class wood has yet to be determined.
The top three saws in each class will be brought up for inspection this year. The 170 and wild thing is excluded. All classes will have saws running on the ground and hands on the wood. Both the 170 and wild thing is excluded from that.
Any questions please ask.
 
Eric said 42 of the 50 slots for the competition saw racing is filled. Only 8 slots left.

Also allowing unlimited spectators this year instead of capping it off like last year at 100-150.

So email him if entering those saw classed in Oct. GL

sf233.jpgsf23333.jpgsf233333.jpgsf2333.jpg
 
Eric for Sawfest coming up quickly. = Classes for this year.
Friday clone wars 660 and 372
Wild thing Saturday classes.
55cc Must be.325 round file chain.
65cc 3/8 round file
85cc 3/8 round file
Cheap saw shootout ms170
Barrel split 
Pole saw race
Bounty log/5$ log 
Limbing contest
………………….. RULES…………………… Clone…. Stock bore and stroke. Must have working choke…air filter and stock appearing muffler. 660 is 24” bar 372 is 20”. You can run larger if you choose to. This class is still considered a firewood saw/work saw build.
Saturday 55-65-85cc classes Stock appearing muffler working choke and air filter. Stock bore and stroke (you can run under the cc classification just not over what’s listed) 55cc class 14”to16” bar 65cc 18” bar 85cc 20” bar. That what’s recommended.
Wild thing and cheap saw shootout ms170. Both classes must be stock bore and stroke Any and all fuels apply for this class. Pipes two piece heads nos all acceptable along with chains. Top three saws in all classes excluding wild thing and Ms170 will be inspected.
You cannot share saws. If you run a lesser cc saw in a larger cc class they must follow the guidelines of that class (example…running a 50cc saw in the 65cc class you must switch the chain to 3/8 for that larger class) All PPE must be on if your gonna be run a chainsaw. Chaps hearing, and eye protection. No exceptions to the rules. liability waivers must be signed. Before you can play with any chainsaws.
……………………FUELS……………………. All regular class 55-65-85-clones must run on regular pump gas just like a normal firewood saw would use. NO EXCEPTIONS! Wild thing and cheap saw ms170 can run whatever fuel you want. Wood for this year is 8x8 aspen 12” round white pine 12x13 cottonwood 19” round cottonwood. Friday test and tune 3:30-5:30 start time 6pm Saturday start time 10am
 
Friday the wild thing class build off got a new king. Last years winner was dethroned.

New guy was running NOS and a homemade pipe. Guy in red t-shirt is the winner of WT class.

See Shaun Carr, Clint Davis, Ken Freeman hiding back there watching in that pic.


Then onto clone wars last night.

Still going on today too.


sf23xwttt.jpgsf23xwtt.jpgsf23xwt.jpgsf23x.jpg
 
2024 info starting

Might be some folks that want to get into this CLONE Stock Appearing build off here for Sawfest next Oct. Using the G366 which is a copy of the stihl 361.
Some info that is out = Next years clone saw is ms361 full race
Stock bore and stroke muffler saw it OK.
Must use aftermarket case cylinder and piston.
OEM cranks, flywheels, etc. are encouraged more details to follow .
Nitrous, funny fuel and 2 piece heads ok.
I would think anything goes for a square race chain in this too. Nobody runs round on race saws. So my WAG
This is also why you seen me showing @Red97 Joe the Wayne's video's on Race saws group.
Joe's start in pic.

g366sa.jpg
 
Eric = 361 clone wars saw for next year is a full race class. This will be a muffler class and still needs to be stock bore and stroke. All fuels two piece head square grind chains are acceptable. No NOS in this class. The saw will be running over the wood. Same as the wild thing and cheap saw shootout classes.

Nitro Alky etc all allowed though. No NOS bottles like on Wild Thing and 170 class

Cheap saw for next year is the 46cc plastic saws again. Poulan 295 4620 etc etc.

So get those build going.

Plus all the same other classes for now.
 
where do you get info for sawfest 2024??? I'd like to attend and maybe compete in some classes. buy I'd like a set of written rules and info so I know what to build... thanks.
 
Back
Top