Scrounging Firewood (and other stuff)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Ok,

I don’t want to offend but it looks like if you continue this pile it will fall.

The angle of the wood is VERY important. It can NEVER become parallel with the ground. Always slopping in. If it becomes parallel it will fall

My example [emoji3596]. First picture is as close as you should EVER let it get to parallel. 2nd picture shows it better

745a84d1b92a6d3501ef1b8963032e7f.jpg

d477b61e7d788ce326e65823012519c2.jpg


Videos that are informative [emoji3596]






Sent while firmly grasping my redline lubed RAM [emoji231]

SNAKE! :surprised3:
 
Ok,

I don’t want to offend but it looks like if you continue this pile it will fall.

The angle of the wood is VERY important. It can NEVER become parallel with the ground. Always slopping in. If it becomes parallel it will fall

My example [emoji3596]. First picture is as close as you should EVER let it get to parallel. 2nd picture shows it better

745a84d1b92a6d3501ef1b8963032e7f.jpg

d477b61e7d788ce326e65823012519c2.jpg


Videos that are informative [emoji3596]






Sent while firmly grasping my redline lubed RAM [emoji231]
Gee I wish I had read that a couple hours ago! Lol!
I'm not going to go as high as yours. Mine is about 6.5' wide and it's at 4' high now. I thought I'd go to 5 in the center. Every time the pieces got level, I put some cross pieces around the outside to tilt them in. If it shows signs of wanting to fall, I'll go around it with chicken wire! The eyeball says it should be close to a full cord once I build the center up a bit. I just dumped the wood in the center, I wasn't as fastidious as you. Lol.
f11aff9e9e8ab5a48722f3cf7b67f854.jpg


Sent from my CLT-L04 using Tapatalk
 
Loving my Christmas present by the way. Haven't hardly used it. Split close to a cord today on less than a tank of fuel. Also split up a stash of small pieces of apple and pear for the BBQ. After those ribs I made I get hungry every time I see apple;
b61f3e3c233dd50a0b1021cdc9d9697e.jpg
00577d4f6dc5aa6ac1c804018da06c29.jpg
0e4fec5dfbc6727fa87668e539b7841a.jpg


Sent from my CLT-L04 using Tapatalk
 
Gee I wish I had read that a couple hours ago! Lol!
I'm not going to go as high as yours. Mine is about 6.5' wide and it's at 4' high now. I thought I'd go to 5 in the center. Every time the pieces got level, I put some cross pieces around the outside to tilt them in. If it shows signs of wanting to fall, I'll go around it with chicken wire! The eyeball says it should be close to a full cord once I build the center up a bit. I just dumped the wood in the center, I wasn't as fastidious as you. Lol.
f11aff9e9e8ab5a48722f3cf7b67f854.jpg


Sent from my CLT-L04 using Tapatalk

I only do the bottom layer with the pc vertical. Technically you are supposed to do all of them that way for air flow. But Iv never seen a difference. I only do the bottom layer because it makes the “base” more dense and tightly packed. After that the rest of the middle gets filled with the odd shaped or short pc’s.

I do 8 foot diameter and around 9 feet tall. I just use a truncated cone calculator to find the volume.
I use 4 foot Radius at the bottom and a 2 foot radius for the top and 9 feet tall . That puts it at around 2 cord. I am being conservative with the measurements of this to be safe

https://keisan.casio.com/exec/system/1223372110



Sent while firmly grasping my redline lubed RAM [emoji231]
 
Loving my Christmas present by the way. Haven't hardly used it. Split close to a cord today on less than a tank of fuel. Also split up a stash of small pieces of apple and pear for the BBQ. After those ribs I made I get hungry every time I see apple;
b61f3e3c233dd50a0b1021cdc9d9697e.jpg
00577d4f6dc5aa6ac1c804018da06c29.jpg
0e4fec5dfbc6727fa87668e539b7841a.jpg


Sent from my CLT-L04 using Tapatalk

NICE!



Sent while firmly grasping my redline lubed RAM [emoji231]
 

Latest posts

Back
Top