Fish
Tree Freak
Great post about a well asked about topic!!!
Back from where?ok, i have the saw back... its semi running. wont idle and wont rev freely. acts like its miss firing...which is worse than it was when i took it in for service..at least before it rev'd up but only died after a min or so.
thoughts?
any offers on purchasing it?
Back from where?
Here is a pic of me trying to mount a coil off of an old 028 onto the 032,
the holes are off.
can the mounting holes in the coil be elongated and the part used as a replacement
I have converted two 032's over with bad points/condenser setup. Go to Banta Saw - Electrical / Ignition - Ignition Modules (Universal & OEM). Use the brown ATOM, just follow directions on package. Easy swap out, don't mount ATOM under flywheel. Mount ATOM near coil or P.M. me if you need any help. Use the yellow ATOM for swapping out a bad electronic trigger assembly.
Hope this helps,
Brad
The module portion from the 1300 coil will fit the 032 poles, but it requires crankcase modifications in order to work. I have done it successfully. You supply the 1300 coil, and I charge $80 to do the conversion.Back from a friend of a friend that used to be a stihl dealer for 20years.
Enter your email address to join: