Outdoorguy1979
ArboristSite Operative
So I came across a stihl 039 for 20 bucks, so I got it. Found out it needed a new piston and cylinder. I found a cross performance piston and cylinder combo for a good price.
I have rebuilt the saw 2 times already and am only getting about 130 psi, I think I should be about 150 psi. The problem I'm running into is this the carb.
I lost the original carb so I went and bought 2 new ones. One carb i have no low side on the other carb i have no high side. Both carbs and spitting gas out of the carb am at a loss as i need to get my saw running, any advice is appreciated and thanks in advance
I have rebuilt the saw 2 times already and am only getting about 130 psi, I think I should be about 150 psi. The problem I'm running into is this the carb.
I lost the original carb so I went and bought 2 new ones. One carb i have no low side on the other carb i have no high side. Both carbs and spitting gas out of the carb am at a loss as i need to get my saw running, any advice is appreciated and thanks in advance