Stihl 048 piston and cylinder kit
- Thread starter Alex D
- Start date
Help Support Arborist Forum:
That is a no go on a aftermarket cylinder because there has never been one made, though you can find some pistons on Ebay. Every once in a while you will see a complete top end on Ebay but they usually go pretty quick. You can also install a 042 top end, though it is a smaller displacement and you are still in the same boat with aftermarket parts.
Parts are very rare on the 042 and 048. Your best bet is to put an email notice on an ebay search.
Depends greatly on condition. Again, they're rare enough that you're going to have trouble finding many that have sold to see what they sold for. Mine has an 042 tank.
I have seen them sell anywhere from 75 to 300. The ones that seem to bring the most are the 048 Supers, seems that there were very few of them made. May want to try posting a wanted ad in the classifieds on this site or in the Swap Meet thread found in the Stickies sub forum. I found my 048 top end with a fellow member in Canada.
Fellas -
Bumping an OLD thread. Looking for a good piston for an 048. I haven't disassembled it, but I think the jug is probably good. No luck finding NOS, but there are a few options for aftermarket. I was hoping to find a Meteor, but not finding any. Here's what I'm finding with a search:
https://www.amazon.com/Piston-Replaces-1117-030-2001-Quality-Tooling/dp/B01MROP0D4 - this one is from the Lil Red Barn for $34.95 - looks like it's made in Japan, not China. Said to be high quality.
https://shop.saegenspezi.de/piston-fits-Stihl-048-AV-048AV-52mm - from Saegenspezi in Germany for $20.
https://www.ebay.com/i/291797873460?rt=nc - Golf, on eBay for $30.
https://www.ebay.com/itm/Stihl-048-piston-kit-52mm-/130649490442?_trksid=p2385738.m4383.l4275.c10 - $20 on eBay from HL Supply. Looks like this is a Golf kit, too.
I'm inclined to go with the Lil Red Barn piston from Amazon. Might throw some Caber rings on it, just to be safe.
Thoughts?
Thanks,
Scott
Bumping an OLD thread. Looking for a good piston for an 048. I haven't disassembled it, but I think the jug is probably good. No luck finding NOS, but there are a few options for aftermarket. I was hoping to find a Meteor, but not finding any. Here's what I'm finding with a search:
https://www.amazon.com/Piston-Replaces-1117-030-2001-Quality-Tooling/dp/B01MROP0D4 - this one is from the Lil Red Barn for $34.95 - looks like it's made in Japan, not China. Said to be high quality.
https://shop.saegenspezi.de/piston-fits-Stihl-048-AV-048AV-52mm - from Saegenspezi in Germany for $20.
https://www.ebay.com/i/291797873460?rt=nc - Golf, on eBay for $30.
https://www.ebay.com/itm/Stihl-048-piston-kit-52mm-/130649490442?_trksid=p2385738.m4383.l4275.c10 - $20 on eBay from HL Supply. Looks like this is a Golf kit, too.
I'm inclined to go with the Lil Red Barn piston from Amazon. Might throw some Caber rings on it, just to be safe.
Thoughts?
Thanks,
Scott
cus_deluxe
Commie Satan turd
Ive heard the lil’ red barn pistons are pretty good, never seen or used one tho
smokey7
jack of a lot ace of a few
I have a few saws running lrb pistons with their rings with no problems. I think they are way better then hutzl and golf pistons by far.
Thanks for the input, fellas.
Scott
Scott
didn't know there was such a thing as a 048super....cool
Ben Lomond
ArboristSite Lurker
I use saegenspezi kits in two 044s with no problem, I figure the 048 piston will work just fine...shipping is only 10 euros fro them, so it would be the cheapest option...I have an 048 super, the cylinder is marked +++ it's got a pressure can muffler an a WS25 carb which is a little bigger.....supposed to be a tad more powerful
glock37
Addicted to ArboristSite
https://squareup.com/market/chainsaw-conservation-com/item/av-new-cylinder-kit-oem-stihl
Dave is awesome guy to buy from
Dave is awesome guy to buy from
Yep. Got my 045 NOS jug and piston from him. But I'm looking for the 048 piston, not the 042. I ended up ordering from LRB.
Thanks
markds2
ArboristSite Lurker
Hello Sir, I know this is an old thread (very old) but I wondered how the 048 piston from LRB worked out for you. I've just picked up an extremely tidy 048 that's apparently been straight gassed, and I'm keen to know how this went for you.
I sold a new NOS 048S P/C set to a member here last spring. It was mistakenly sold to me on ebay as a 038M set.
Piston worked out fine.
markds2
ArboristSite Lurker
Thank you sir, I've actually just picked up a NOS OEM piston kit off Ebay.
