K Kidneycutter Kidneycutter Joined Jan 21, 2013 Messages 292 Reaction score 71 Location Suffolk,UK Dec 11, 2018 #1 advice please! Gonna rebuild the 08 after crankcase split. Should I put the bearings on the shaft or in the crankcase housing. Do I need heat or stick the shaft in the freezer? Any input, as always, is greatly appreciated. Thanks,
advice please! Gonna rebuild the 08 after crankcase split. Should I put the bearings on the shaft or in the crankcase housing. Do I need heat or stick the shaft in the freezer? Any input, as always, is greatly appreciated. Thanks,
Skavenger ArboristSite Lurker Joined Nov 1, 2018 Messages 32 Reaction score 54 Location North woods MN Dec 11, 2018 #2 Heat the housing install bearings in the case halves.
homemade Certified Chainsaw Tester Joined Nov 25, 2010 Messages 1,002 Reaction score 1,110 Location Eastern WI Dec 11, 2018 #3 Yup, then freeze the crank when you assemble the case. The crank should slip into the bearings nicely.
Yup, then freeze the crank when you assemble the case. The crank should slip into the bearings nicely.