Preston624
ArboristSite Lurker
I need help in fixing an oil leak from the bar oil tank on the head. Does anyone know where I can buy a shop manual? Thanks.
Thanks for the reply. I had already checked the manual thread before I asked for help here. I'm new to the forum so I may have missed it. But, would really appreciate the help in the repair of the leak. Best.Look in the manuals thread. If its not there ask, someones got it. I'll look around my stuff for it. Its really easy to take apart. I think you've got the one with a rubber gasket.
Thank you for checking. I'm pretty handy in mechanical repairs and would like some written info for reference so that I don't mess something up. The nearest Stihl dealer is over 30 miles away. So I hoping to save myself a long drive.im not seeing a ht103 service manual on stihl tech site
The repair sounds simple enough. I'll watch the repairclinic on youtube and give it a try. Thanks for all of the help.If your handy then all you've got to do is remove the 4 screwdriver the oil reservoir and remove it, then take a picture of it. A rubber gasket goes around the inner mating surface that seals it and when the reservoir is mounted keeps it from leaking. If you can get a ipl that will show you how it goes together. If you can, check out the repairclinic on youtube. They've got an excellent video on how to repair the oil pump and you've got to take it apart to get to the oil pump. That should show you all you need to know about the drive head.
@ray benson. see if he can help...pm him for a manualThanks for the reply. I had already checked the manual thread before I asked for help here. I'm new to the forum so I may have missed it. But, would really appreciate the help in the repair of the leak. Best.
Thank you for the posting the manuals. They clear up a lot of questions with good directions. Besthere are manuals. it is a 4180 engine. and the kombi covers the pole and cutter head
Enter your email address to join: