watsonr
Addicted to ArboristSite
- Joined
- Jan 3, 2010
- Messages
- 7,088
- Reaction score
- 2,130
Sugihara chainsaw bars are considered some of the best in the industry by many users and with the addition of inserts reduce the overall weight of a bar significantly! I'm told that the 24" bar weighs 2.97lbs and the Stihl ES is 3.67lbs. Sale will run until Midnight Sunday, 20 October. Please tell me exactly what you want. There are no substitutions, no requests for other sizes or special orders. What's here is what is available and when a bar runs out, it's gone! I will take orders later down the road for these bars, but the prices will not be reduced like they are now.... I will always sell them cheaper than the supplier!
These sizes and quantities are direct from the supplier as of today @4:30PM, Eastern time. You may find a dealer that may be cheaper, if you do, I will match his price (you will need to verify it) as they don't give these away!
Prices
20" bars are $60
24" bars are $80
28" bars are $100
32" bars are $125
36" bars are $135
20" Hard tip is $65
20" Standard weight is $55
Shipping is
1-2 bars............$12.50
3 bars................$15.00
4 or more ..........$17.50
Outside the lower 48 states ...... actual cost.
Stihl model size quantity
available
SV3U-0Q50HV 20" BAR 3/8 50G 72DL 10
SV3U-0Q62HV 24" BAR 3/8 50G 84DL 34
SV3U-0Q71HV 28" BAR 3/8 50G 93DL 31
SV3U-0Q80HV 32" BAR 3/8 50G 105DL 16
SV3U-0Q80HV 32" BAR 3/8 63G 105DL 44
36" bars are limited, ask me first
SV3C-0D50 20" BAR 3/8P 50GA 72DL 22 HARD TIP WITH INSERTS
SV3T-0Q50HV 20" BAR 3/8P 50GA 72DL 20 STANDARD WEIGHT BAR (NO INSERTS)
Husky Large
Mount
VT3U-0Q50HV 20" BAR 3/8 50G 72DL 20
VT3U-8Q50HV 20" BAR 3/8 58G 72DL 22
VT3U-0Q62HV 24" BAR 3/8 50G 84DL 16
VT3U-8Q62HV 24" BAR 3/8 58G 84DL 39
VT3U-0Q71HV 28" BAR 3/8 50G 93DL 50
36" bars are limited, ask me first
They do carry replacement tips. If you want a .325 tip, 58GA, let me know. they are $14 each.
Bar adapters for Stihl mount to reduce it to Husky mount are solid type $14.00, spring type free for the asking.
I'm still trying to work out a deal for 16"/18" bars. When it becomes available, I'll add to this thread.
There are some carving bars as well, ask me to check availability.
You will need to send me a PM here or email to [email protected] to receive a PayPal invoice. That communication (PM or email) needs to include your email address and exactly what you want. I'll send an invoice and when paid, the paid invoice needs to contain your shipping address.
You will be served in the order that I receive the PM/email. May take me a day or so to get to you, confirmation is an invoice that your order was received.
I've had to many problems with PO Boxes, unless you contact me directly, no PO Boxes. For some of you, this may be the only way... contact me directly for a PO Box shipment!
Please don't wait to order, limited supplies on several of these bars. If I send back a reply to the PM or email announcing they are out of stock.... see if I have another size. They have a ton of 24" Stihl mounts, limited numbers of the 20" mount.... if you can use a 24" instead, then get it.
I'll update the group buy thread with quantities remaining at least once daily.
These sizes and quantities are direct from the supplier as of today @4:30PM, Eastern time. You may find a dealer that may be cheaper, if you do, I will match his price (you will need to verify it) as they don't give these away!
Prices
20" bars are $60
24" bars are $80
28" bars are $100
32" bars are $125
36" bars are $135
20" Hard tip is $65
20" Standard weight is $55
Shipping is
1-2 bars............$12.50
3 bars................$15.00
4 or more ..........$17.50
Outside the lower 48 states ...... actual cost.
Stihl model size quantity
available
SV3U-0Q50HV 20" BAR 3/8 50G 72DL 10
SV3U-0Q62HV 24" BAR 3/8 50G 84DL 34
SV3U-0Q71HV 28" BAR 3/8 50G 93DL 31
SV3U-0Q80HV 32" BAR 3/8 50G 105DL 16
SV3U-0Q80HV 32" BAR 3/8 63G 105DL 44
36" bars are limited, ask me first
SV3C-0D50 20" BAR 3/8P 50GA 72DL 22 HARD TIP WITH INSERTS
SV3T-0Q50HV 20" BAR 3/8P 50GA 72DL 20 STANDARD WEIGHT BAR (NO INSERTS)
Husky Large
Mount
VT3U-0Q50HV 20" BAR 3/8 50G 72DL 20
VT3U-8Q50HV 20" BAR 3/8 58G 72DL 22
VT3U-0Q62HV 24" BAR 3/8 50G 84DL 16
VT3U-8Q62HV 24" BAR 3/8 58G 84DL 39
VT3U-0Q71HV 28" BAR 3/8 50G 93DL 50
36" bars are limited, ask me first
They do carry replacement tips. If you want a .325 tip, 58GA, let me know. they are $14 each.
Bar adapters for Stihl mount to reduce it to Husky mount are solid type $14.00, spring type free for the asking.
I'm still trying to work out a deal for 16"/18" bars. When it becomes available, I'll add to this thread.
There are some carving bars as well, ask me to check availability.
You will need to send me a PM here or email to [email protected] to receive a PayPal invoice. That communication (PM or email) needs to include your email address and exactly what you want. I'll send an invoice and when paid, the paid invoice needs to contain your shipping address.
You will be served in the order that I receive the PM/email. May take me a day or so to get to you, confirmation is an invoice that your order was received.
I've had to many problems with PO Boxes, unless you contact me directly, no PO Boxes. For some of you, this may be the only way... contact me directly for a PO Box shipment!
Please don't wait to order, limited supplies on several of these bars. If I send back a reply to the PM or email announcing they are out of stock.... see if I have another size. They have a ton of 24" Stihl mounts, limited numbers of the 20" mount.... if you can use a 24" instead, then get it.
I'll update the group buy thread with quantities remaining at least once daily.
Last edited:
