P PorKChoP13 ArboristSite Member Joined Feb 29, 2012 Messages 65 Reaction score 1 Location Southwest Virginia Nov 25, 2012 #1 how do i keep the whole stud from screwing out of the saw when i take the chain break off
Guido Salvage Supreme Saw Whoreder Joined Apr 27, 2010 Messages 11,513 Reaction score 7,869 Location Farmville, VA Nov 25, 2012 #2 What model saw do you have? If it is a CS-415 I have one here that I could check.
P PorKChoP13 ArboristSite Member Joined Feb 29, 2012 Messages 65 Reaction score 1 Location Southwest Virginia Nov 25, 2012 #3 its a ecv 4501 when i loosen the nuts the whole stud comes out
Guido Salvage Supreme Saw Whoreder Joined Apr 27, 2010 Messages 11,513 Reaction score 7,869 Location Farmville, VA Nov 25, 2012 #4 Sounds like the case is stripped out.
P PorKChoP13 ArboristSite Member Joined Feb 29, 2012 Messages 65 Reaction score 1 Location Southwest Virginia Nov 25, 2012 #5 its not stripped they go in and hold snug but the threads screw out in the same direction as the nut loosens
its not stripped they go in and hold snug but the threads screw out in the same direction as the nut loosens
S s219 ArboristSite Guru Joined Sep 19, 2011 Messages 564 Reaction score 73 Location Virginia Nov 25, 2012 #6 Get some Loctite.