Is there a trick to getting the clutch off? The nut is off but the clutch doesn't seem to budge.
I use a three jaw puller.
Is there a trick to getting the clutch off? The nut is off but the clutch doesn't seem to budge.
..
That worked well!.....Not!
Cheers scallywag, does an 090 top end bolt straight on? Anyone know of a good aftermarket top end kit for this saw?
if its a traditional Land Rover, that includes new ones, (not a later range rover, disco 2 3 4 or freelander) the only reason a wheel would "fall off" is because of abuse, neglect or stupidity! they are a full floating axle design. Anything can be broken, stupid normally wins....
I think it typical of 95% of guys to bag other brands and blame any problem on that other brands manufacture. I like some things from each manufacture...and hate some things about my Landy.
After there being nearly 15 Land Rovers in our family over 55 years, from a 1948 swb through to a 2008 model, they all lasted, performed & worked really well with very little modification from standard.I think it typical of 95% of guys to bag other brands and blame any problem on that other brands manufacture. I like some things from each manufacture...and hate some things about my Landy.
After there being nearly 15 Land Rovers in our family over 55 years, from a 1948 swb through to a 2008 model, they all lasted, performed & worked really well with very little modification from standard.
My bros have alloy wheeled ones & they often have trouble getting the wheel nuts off.
Tanks
I'm just over dickheads in general
We are in a coastal environment here so that makes it even worse, they have to use anti seize liberally.nothing to do with manufacturer, My mums VW and Audi wagons had the same trouble. Its simply dissimilar metals, the alloy corrodes a little locking up the wheel nuts etc.
We are in a coastal environment here so that makes it even worse, they have to use anti seize liberally.
Fanks
Didn't I send you a tillotson manual some time ago ? PDF.Any one got any info on the Tillotson HS 208 B carby please , Ive got an IPL but after how to set the Speed Govnor and setting please
yep you sure did, but nothing covering the setting of the govnor VinceDidn't I send you a tillotson manual some time ago ? PDF.
Enter your email address to join: