Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That's what I want, the owner's manual. I have the parts list and diagram PN 211229-03 (attached).

Maybe my local small engine guy has the service manual (not sure though, if he will share!).


i have the master mac service manual. and there is not a manual for the 225-16. it says to refer to the om
 
Good morning all. Just a big thanks to everyone that helps out here. I'm a mech, new to saws and can't find a repair manual for a Husqvarna 235e. Those bolt torque specs are killing me and I have wood on the ground! Kind of puts a kink in the idea of getting things started. I really appreciate all the ideas on larger saws, it really helps to get some perspective for the larger mill saws build. Take care.
 
Good morning all. Just a big thanks to everyone that helps out here. I'm a mech, new to saws and can't find a repair manual for a Husqvarna 235e. Those bolt torque specs are killing me and I have wood on the ground! Kind of puts a kink in the idea of getting things started. I really appreciate all the ideas on larger saws, it really helps to get some perspective for the larger mill saws build. Take care.
Couldn't locate a 235e service manual. Check your inbox for a multisaw service manual along with a 135e, 42 and a 33 service manuals. They should give you a feel for the torque values on the fasteners.
 
-+
Couldn't locate a 235e service manual. Check your inbox for a multisaw service manual along with a 135e, 42 and a 33 service manuals. They should give you a feel for the torque values on the fasteners.
A Big Thanks. The 135e's engine is almost identical to the 235e. The 235 is slightly smaller, so as long as it feels good when I tighten it I think it's a win. Thanks again. I'll look for ways I can contribute as I become more knowledgable. Take care
 
I am trying to find a workshop manual for an 041av. Thanks all, you have been a great help.
 
-+

A Big Thanks. The 135e's engine is almost identical to the 235e. The 235 is slightly smaller, so as long as it feels good when I tighten it I think it's a win. Thanks again. I'll look for ways I can contribute as I become more knowledgable. Take care
Interesting fact: Husq doesn't make a workshop manual for the 235. Good reason why no one could find one anywhere. The bolts on the 135 were 4mm and 235 is 8mm; so called and Tech Support gave me the specs off the 455, said it was the closest and most in that series are similar. Good knowledge if it ever comes up again. Thanks again.
 
This seems like a great group of people. Thank you very much. Would it be too much to ask for a workshop manual for a McCullough Pro Mac 610 for a friend? Take care,
 
Back
Top