Ray, thank you once again!Check your inbox
Ray, thank you once again!Check your inbox
Check your inboxafter an ipl and manual for ms362 c-m
thanks in advance
Check your inboxI am looking for a repair manual for a Stihl 044.
Thank you very much in advance.
Best regards
Jörg
Check your inbox
Check your inboxIs there a different IPL and manual for the 660? That is probably what I should have asked for.
Thanks!!!Check your inbox
Check your Inbox (Stihl models only) and welcome to AS.Service and parts list for Stihl 015l, ms290, 026, McCulloch Mac 110, Husqvarna 51
Done (Husky)Service and parts list for Stihl 015l, ms290, 026, McCulloch Mac 110, Husqvarna 51
Check your inbox for the McCullochService and parts list for Stihl 015l, ms290, 026, McCulloch Mac 110, Husqvarna 51
Check your Inbox.Looking for manual and IPL for Stihl 024 and 026. Thanks!
Done!I'm looking for a IPL for a ms391 with the round filter. Thanx!
Check your Inbox.Hi Gents,
Man, what a morning. I was taking our garbage to the dump and sitting next to the metal pile was two old Stihl power-heads, both appear to be older Stihl 066 Magnum saws. I asked the dump attendant how much for the two saws and he says $3.00 gets them both!
I am looking for an IPL and shop manual for the 066. I am usually a Husqvarna guy but for $3.00 I can spend a few bucks and maybe end up with a decent saw. Here they are, a little rough and one has a broken crankcase but they both turn over the one with the good case even seems to have a decent amount of compression. This ought to be fun....I see on Ebay you can get a new crankcase for less than $30.00, does anyone have a recommendation for a good aftermarket non OEM crankcase to help this broken man stand back up?
Done 3 parts!Hi Gents,
Man, what a morning. I was taking our garbage to the dump and sitting next to the metal pile was two old Stihl power-heads, both appear to be older Stihl 066 Magnum saws. I asked the dump attendant how much for the two saws and he says $3.00 gets them both!
I am looking for an IPL and shop manual for the 066. I am usually a Husqvarna guy but for $3.00 I can spend a few bucks and maybe end up with a decent saw. Here they are, a little rough and one has a broken crankcase but they both turn over the one with the good case even seems to have a decent amount of compression. This ought to be fun....I see on Ebay you can get a new crankcase for less than $30.00, does anyone have a recommendation for a good aftermarket non OEM crankcase to help this broken man stand back up?
Enter your email address to join: