The Unofficial Chainsaw Weight Thread

[Trx250r180]

That 461 is way to heavy for a 70cc saw, I'll keep my 460 thanks.

you can feel 2 oz of weight in a saw cutting wood ?

 

[Rudolf73]

N/a

 

[nmurph]

Please keep the BS out of this thread. It was started as a resource and reference.

 

[Rudolf73]

Please keep the BS out of this thread. It was started as a resource and reference.

My apologies, I was not aware of this reading through the thread but it won't happen again. As you were.

 

[nmurph]

Husqvarna 575

This is not the cleanest saw, but I would bet it is within an ounce or two of the correct weight. The tanks were cleaned and dried, and I pulled the clutch and starter to get them blown out.

 

[nmurph]

Husqvarna 550

This is a very clean, dry 550.

 

[Brendann]

Does anyone have the real world weight of the Jonsered 2253 or 550xp?

 

[SawTroll]

Does anyone have the real world weight of the Jonsered 2253 or 550xp?

Usually the red ones are a couple of ounces heavier, because of the different handlebar and plastic covers - but I have no numbers to post.

 

[SawTroll]

If you are going to post weights in this thread, please post PHO weights. Bars and chains introduce too many variables.

Yes, as do tank contents - empty and clean PHO is the only way to go for real comparisons!

 

[nmurph]

I have a very clean 550. It weighed 11-2.7 dry.

 

[RedneckChainsawRepair]

SOB most of the embedded pics with weights are gone.

 

[nmurph]

I should have nearly all of mine. I will try to repost them when I have time.

 

[SawTroll]

I have a very clean 550. It weighed 11-2.7 dry.

Pretty much as expected then!

 

[SawTroll]

SOB most of the embedded pics with weights are gone.

 

[Brendann]

Thanks, Neal. Today I weighed a new from tlandrum Jonsered 2253 PHO at the local UPS store, and their commercial scale showed 11.15 lbs, or 11 lbs 2.4oz.

 

[Brendann]

SOB most of the embedded pics with weights are gone.

Yeah, I hope going forward, people will type the model & weight along with their picture, in case this happens again. This thread is a really good & valuable resource.

 

[Eccentric]

Would be great if folks would go back and fix the broken pics in their posts here in this thread. It's a great resource.....

 

[nmurph]

Dolmar 123- weight should be very close to 133 and 143 variations

 

[nmurph]

Dolmar 401

 

[nmurph]

Husqvarna 288 Lite