Typhoon
ArboristSite Operative
Quick question.. I run 346's and 350's, and, I was running my 350 yesterday and it was hesitating on acceleration, and bogging in the cut pretty bad. So I adjusted the "H" screw (I assume high speed jet) and its running great again. My question is this: Can the saw be damaged by adjusting the carb screws too far in either direction? Again, this is with the caps ON. I don't want to take them off ever, im not that advanced. I just tweak a little.
Thanks!
-Brad
P.S., what limits the RPM's on these saws? Im thinking it must be some kind of limiter in the ignition?
Thanks!
-Brad
P.S., what limits the RPM's on these saws? Im thinking it must be some kind of limiter in the ignition?