Sold Two 562's. Updated and more added!

[stevetheboatguy]

I took these on trade this summer. I have run them both a bit and my dad has run the one on the left quite a bit. Both have the el46 carb. Have not experienced any issues with them, but I know many people have had them.
They are both 2013 saws. The one on the right has a replacement case on it I'm told. (Supposedly was done under warranty when the saw was new). Don't know if that is true but it looks like it and the id tag is mia.
The saw on the left was out of warranty when it started to leak oil. So the dealer changed a few case bolts and put some rtv over the case seam under the muffler. Has not been a issue but I wanted to disclose of everything I know about them.
I am going to run them some more tonight and get piston pictures for everyone. But both saws start, cut, idle, rev and oil just fine. I have a new plug and sprocket on both of them.
$350 for the one on the left and $375 for the one on the right.
That should give the buyers some room to fix them up to their liking or be a cheap beater pro saw.





Steven

 

[stevetheboatguy]

Forgot to mention. Neither saw has a spike. I will check the case to see if the threads are damaged or if they were run without.

Steven

 

[stevetheboatguy]

Ok here is the low down on where I am after running them a bit more today.

The saw with the replaced bottom end. Ran great for the first tank. Fueled it for a second run and it started up and died. Wouldn't stay running.
I set it aside and ran the one my dad was using. It ran perfect all three tanks. It does have a small leak coming from under the muffler. Looks like the rtv needs to be redone or fixed better. But the saw ran perfectly otherwise.

That brings me to where I am.
I do not have time to play around with them right now. So I am going to make someone a package deal. If anyone is interested.
Both the above saws, one more additional runner that is temperamental and one that needs a few parts.

How does $950 for the three complete and the one parts sound?

There is a extra bottom end and a few more parts that will be included also.

Steven

 

[stevetheboatguy]

Major bummer when I pulled the mufflers tonight to take pictures. All have smoked pistons. Even the one that I ran three tanks through earlier today.
So guess I'm going to be in the red on this one whatever I do.




Steven

 

[barton174]

PM sent

 

[stevetheboatguy]

All pm's replied. Waiting to hear back.

Steven

 

[stevetheboatguy]

Three complete, one mostly complete (only missing the clutch, brake band and a few bolts that I can tell)
All will need pistons and probably resealed. They all have had some run time, so I would assume the crank seals went. But I haven't checked.

Steven

 

[stevetheboatguy]

Calling this one sold. Will return everyone's pm's in order.

Steven