Trent Curtis
ArboristSite Guru
Looking for an unlimited coils for
390XP
372XT.
346XP ...... also need snap on air filter and retention clip for this saw.
390XP
372XT.
346XP ...... also need snap on air filter and retention clip for this saw.
You can become a Supporting Member which comes with a decal or just click here to donate.
346 cyls. are 44.3, I have 2 44 m/m cyls. off 351s which will fit your 346 but I doubt that's what you want.
a good idea if your 346 is an NE is to put the coil from it on the XT then go unlimited for the 346 and 390.
The 44 m/m cyl. was only used in the 351 & some 350s. It is an open port cyl. with less power than both the 42 m/m & 44.3 m/m 346 cyls.Thank you sir- I guess I’m not well versed on these smaller saws. What’s the difference in the 351 346 44mm cylinder?
Trent
The 44 m/m cyl. was only used in the 351 & some 350s. It is an open port cyl. with less power than both the 42 m/m & 44.3 m/m 346 cyls.
It was never used on the 346 tho it would bolt rite on.
Enter your email address to join: