WEST KY GTG 2015!!!!! (September 19, 2015)

[glock37]

Keeps them quieter


Sent from my iPhone using Tapatalk

 

[PA Dan]

But I threw them all away!

 

[glock37]

Never throw parts away


Sent from my iPhone using Tapatalk

 

[Greenthorn]

Winners lists.

 

[srcarr52]

10-10 macs!

I had to put crank seals in a 10-10 once... worst day of my life.

 

[shorthunter]

What we gonna build next year?

How about a common model that can be had cheap. Maybe an Echo CS400 or a Husqvarna 350?

 

[Homelite410]

421 dolmar?

 

[cobey]

Purdy stock saws no port work stock chain muff mod allowed but stock screen


Sent from my iPhone using Tapatalk

I got ugly stock saws...... heck with screens.
I would have to buy a roll to cover all them holes

 

[barneyrb]

I think the next build off should be a 372, MS440, JRed 2171, Dolmar 7300, or whatever saw Jer decides on with one caveat.........do anything you want but only the stock exhaust deflector with the screen intact. Enlarge the hole under the screen all you want but a stock screen/deflector must cover it, and no strainer screens either. Just a stock screen.....

 

[cobey]

Poulan 5020AV......... clambake challenge!!!!!!!
You get extra points if the rotating assembly flys out as you get threw the cant!
It would be a low dollar build and we could get even more pie.......
And stuff

 

[DexterDay]

Stools...

I am a great stool maker!

 

[Deleted member 83629]

Poulan 5020AV......... clambake challenge!!!!!!!
You get extra points if the rotating assembly flys out as you get threw the cant!
It would be a low dollar build and we could get even more pie.......
And stuff

yeah but a 545 can spank a 5020

 

[awol]

1.)John Reilly with his Copsey built saw
2.)TreeMonkey saw
3.)Wiggs
4)Landrum built saw

Who had a Landrum built saw, or was there more than one? My entry was not done by him.

 

[Termite]

I think the next build off should be a 372, MS440, JRed 2171, Dolmar 7300, or whatever saw Jer decides on with one caveat.........do anything you want but only the stock exhaust deflector with the screen intact. Enlarge the hole under the screen all you want but a stock screen/deflector must cover it, and no strainer screens either. Just a stock screen.....

I really like the muffler limits. But how about an X-torq saw there has not been a lot of testing on those models, in my opinion. Ed Heard has a very high opinion of the 372xt.

 

[wigglesworth]

Who had a Landrum built saw, or was there more than one? My entry was not done by him.
View attachment 448709

skippysphins had it.

It looks like that's an average of everybody's second cut maybe?

I'd like to see the average using both cuts if anybody has it. I didn't get a pic....

 

[cobey]

yeah but a 545 can spank a 5020

Oh it can for sure, I was just thinking of a cheap one for everyone to build

 

[blsnelling]

skippysphins had it.

It looks like that's an average of everybody's second cut maybe?

I'd like to see the average using both cuts if anybody has it. I didn't get a pic....

That is from a screen shot of the video that was posted on FB. If I had the data, I could do up another spreadsheet.

 

[glock37]

We missed ya brad i thought this year i was going to finally meet ya !




Sent from my iPad using Tapatalk

 

[blsnelling]

We missed ya brad i thought this year i was going to finally meet ya !

Thanks Mike. I was at a men's retreat with my brother, BIL, nephew, cousin, and about 160 other men from our churches Thursday evening through Saturday.

 

[awol]

skippysphins had it.

It looks like that's an average of everybody's second cut maybe?

I'd like to see the average using both cuts if anybody has it. I didn't get a pic....

That is the results from the second run, seen in the video above. I also would like to see the times from the first run, as I was a full second faster at 22.02.