What bar do you run?

[SawTroll]

Mr troll, if a 16" is good for a 036 then you must be running 12" on your 50cc Huskys :hmm3grin2orange: They are so light, a 16" would tip the scales!

As far as balance, a 20" ES bar can't be beat on a 036

My 50cc saws mostly have 16" bars on them, but that is not common around here.

 

[Trigger-Time]

On 034/036, have run .050 3/8 Picco, .325 .063 and 3/8 .063 from 15 to 20 inch bars.

The 036/360 and it's younger sisters are very versatile saw's.
At one time 036 was the only saw I owned, if I ever have to go
back to one saw it will be one of them. Unless it's because of old age.
Then I will have to use a lighter saw.


TT

 

[Nardoo]

Our hard woods dictate shorter bars usually. I use 18" on my 034 supers and 361 - balance is just fine and not as many cutters to sharpen.

Al.

 

[slowp]

My friend the Grandma runs a 28 inch bar on her old saw.

I did not bond well with the 360 so do not run that saw.