Diesel nut
ArboristSite Operative
Looks a lot like my husky rancher 61....
It does appear to have the 2-piecc ignition set up. This leads me to believe it is 162/61/ or 266/8 .
The best way to determine other is to pull muffler and check bore dia.
It does appear to have the 2-piecc ignition set up. This leads me to believe it is 162/61/ or 266/8 .
The best way to determine other is to pull muffler and check bore dia.
:agree2:
The saw has the wrong oil pump to be a 181/281/288. The pump on this saw would have been found on a 61/66/162/266/268/272.
One thing that I notice is the idle screw is part of the crankcase and not on the carb, to me that counts out the 268/272. If I had to take my best guess I would lay my money on a 61 or 266 SE/SG.
Edit:
With the idle screw being in the case that would most likely make the carb a Tilly 163A
It does appear to have the 2-piecc ignition set up. This leads me to believe it is 162/61/ or 266/8 .
The best way to determine other is to pull muffler and check bore dia.
It looks the same as my Jonsered 670 champ so I would presume it to be a 272xp.
I always thought Husky 266 = Jred 670.
I always thought Husky 266 = Jred 670.
It basically was, but there were several differenses.....
I always thought Husky 266 = Jred 670.
Ok, decided to check the Acres chainsaw site and I am a bit wrong, Husky 266xp is 66.7cc 3.3kw rated, Jonsered 670 super is 66.8cc 3.7kw rated, Husqvarna 272xp is 72cc and 3.8kw rated power. Sorry.I had heard 272 = 670 and may be wrong but my saw hasn't complained with the 272 parts..............
Ok, decided to check the Acres chainsaw site and I am a bit wrong, Husky 266xp is 66.7cc 3.3kw rated, Jonsered 670 super is 66.8cc 3.7kw rated, Husqvarna 272xp is 72cc and 3.8kw rated power. Sorry.
Ok, sorry if any of this doesn't make sense, but...
I don't where the number plate is, or I just can't find it! sorry
The spring in the clutch is a single spring goes all around, not 3 springs
I measured the bore and it seems to be about 50mm
I think the new photos should help too.
Cheers
By the way Im in the UK not Australia, and i think this saw was first bought and used in the UK.
I had heard 272 = 670 and may be wrong but my saw hasn't complained with the 272 parts..............
Enter your email address to join: