What's on your bench

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Very nice saw
my favorite series I've run them since the 80s
I like the 266 the best
My stumpshot ported 266 has 220# comp
It's fun to start.
Year's back I found a nos 66 and a 266se with a half wrap
at a old saw shop he was a hoarder
He wouldn't let them go.
I had been looking for a 266 for at least a year and a half before I found that 266XP. I figured eventually I’d find a nice one and boy did I. It’s a strong runner, I could run it as-is but I’m gonna go through it anyway. It’ll be in the rotation for many years to come.
 
I had been looking for a 266 for at least a year and a half before I found that 266XP. I figured eventually I’d find a nice one and boy did I. It’s a strong runner, I could run it as-is but I’m gonna go through it anyway. It’ll be in the rotation for many years to come.
upload_2021-3-3_17-55-54.png
I've never sold any of my 2 series and have had many of them since the 80s/90s
A ported 266 is my favorite all around saw.
 
it looks like there are too many of them ;-)
Nah
I sold all the saws I didn't use anymore
I'm keeping all my 2 series and 371/372 saws and parts
Many parts are too hard to find now.
I bought this pile of 2 series a couple years ago
When they do my knee replacement
And I'm off work I'll build them.20200108_144501_HDR.jpg
 
View attachment 990910
I've never sold any of my 2 series and have had many of them since the 80s/90s
A ported 266 is my favorite all around saw.
Quite the assortment you have there. I’ve already got my eye on another 266 it’s a SE with a full wrap. And I just so happen to have a really nice 268 top end lying around.
 
Fixing up even an old hammer can be therapeutic. Glad not everyone throws out stuff because it's old.
it is! u r right. but i guess, even eventually... i will get tossed out, too!!!

got my lil hammer project half-a**'d together, but then ran across TNN hickory handles. their tech told me what was wrong with my project, so i wham, bam... thank you! and knocked the head back off. cut a wood wdge slot in handle end, modded up the wedge, lubed it all (wood) with Titebond glue... and wham/bamm'd that in... trimmed and set it all with a steel wedge. couple days later worked on the handle end missing piece. wood filler all but dry mud. but wet enuff err moist... to smear in place. and some touch ups next day. its last 'hurrah!' stain test says wood filler will look good stained along with the hickory! all that has gone well...
P1010001.JPGP1010015.JPGP1010019.JPGP1010041.JPGP1010053.JPGP1010048.JPG
and some artsie/tartsie art n paint planned now for the hammer head. :)

noting Note A in their guide

https://www.tennesseehickory.com/images/RehandlingDirections.pdf
 
yo S_r like that saw workbench! would make D. Proenneke proud!! :yes: the lathe says a lot about you!! of course, so does the clean shop! nice set up....

:drinkingcoffee:
Thanks! I think I showed a picture of the whole bench elsewhere in this thread, but basically a rolling bench out scrap wood or the punkier logs that were out in my log pile. I've got a vise and chain spinner/breaker on it.

I'm a bit OCD about keeping the shop clean. I also enjoy running the lathe or working on saws...it's to me what fishing is to most other people...just a relaxing activity.

Your hammer is coming around. I really like being able to recycle or refresh an old tool into something useful again.
 
Quite the assortment you have there. I’ve already got my eye on another 266 it’s a SE with a full wrap. And I just so happen to have a really nice 268 top end lying around.
Buy all you can find
I used to get builder's or running 2 series for 50.00
Usually 3-450.00 for a runner now.
I have several ported 266/268/272 saws
And they run neck and neck
With 24" bar's in hardwood.
20190814_182750.jpg
I got this 97 low hour 268 off a guy in florida
He was selling it on o pe
Luckily my brother happened to live near him
And picked it up for me.
Because that guy eventually ripped off several members buying saws from him online.
Strangely he took far less money from my brother than I agreed to for it.
I had zoo city saws port a closed port 268 for it
I just haven't put it on yet.
 

Latest posts

Back
Top