manual
Addicted to ArboristSite
Talking about crank seals, heres how to get to the crank seal on some Huskys. this is the clutch side.
After removing the clutch assy. Insert two screws in threaded holes in oil pump, screw in equality until pump is loose then pull off by hand.
Now you MUST use a oil pump drive puller to remove the drive or you will chip and destroy the drive.
After removing the clutch assy. Insert two screws in threaded holes in oil pump, screw in equality until pump is loose then pull off by hand.
Now you MUST use a oil pump drive puller to remove the drive or you will chip and destroy the drive.