Zama carb kit selection help PLEASE! PN just for the diaphragms and gaskets

[Dan_IN_MN]

Well I'm working on a my FIL's Craftsman 42cc saw. The carb is a Zama W26B and then there's a 66A I've found the full kit number which is RB 129. Anyone out there know the PN just for the diaphragms and gaskets? For some reason I find carb and kit numbers very confusing! Is there any logic in the numbering?

What Poulan model equivalent is this saw? (I know WildThing....but what #?) I also need a sprocket, clip and a chain brake lever.

I know I just passed the value of the saw! But......you use what you've got.....

Here's a pic I stole off of the net:

 

[Fish]

You don't have the model number of the carb, Like "C1U"?

It is a newer Poulan, like a Poulan 3418.

 

[Fish]

I parted out some 3214s, so I likely have the chain brake lever...

 

[Fish]

Should be a new funky stratified carb.

 

[kr5258]

See this link: http://www.zamacarb.com/pdfs/QuickKit_CR2010.pdf

The GND Kits are gasket and diaphragm only.

 

[Roanoker494]

Your carb should be a c1m-W26B which is kit GND-70.

RB= Rebuild
GND= gasket and diaphragm

 

[Dan_IN_MN]

See this link: http://www.zamacarb.com/pdfs/QuickKit_CR2010.pdf

The GND Kits are gasket and diaphragm only.

Some logic added to the mess! Thanks!

 

[Fish]

GND= gasket and diaphragm

gasket n' diaphram??????

Must be from South China!!

 

[Dan_IN_MN]

I parted out some 3214s, so I likely have the chain brake lever...

PM sent

Should be a new funky stratified carb.

Yes it's the stratified carb...... Actually....it looks like a regular carb with an additional plate fastened to the back of it.

The numbers I posted were all that I could find..... That doesn't mean other numbers weren't on there!

 

[Dan_IN_MN]

Thanks to all that stepped up and educated me!

Do you think I should Muf-mod this thing before I give it back to my fil? :hmm3grin2orange: I'm thinking YES!