Which of these Solo 681s looks fastest and strongest?

[jeepyfz450]

Perhaps you've never been treated like I have by EC and his buddies?

I wasnt talking about you........ lots of people like jumping on the Brad Haters wagon.

 

[PB]

I would do that in a heartbeat! It's others that refuse.

Brad, starting this thread was not a way to let things go. If you keep picking at a scab when it itches you will get an infection.

I have no beef with you, but starting this thread was not one of your smarter moves.

 

[blsnelling]

Look at the title of the thread? Which of these Solo 681's looks faster and strongest? WTF does that mean exactly...to me it means you think in your brain that your 681 is faster because it revving with a lite hand... Who gives a ****!

Look at the vids chucker posted in the same wood months later with your 681 running a race chain, probably one of Eric's chains that you claim are seconds faster. Don't try and tell me that saw was faster, I seen the POS run a wkpoors, Bills 681 ran alot faster in the AM and you were so embarrassed you didn't even race it in the class when we raced, it sat on the tailgate.

You don't back down from running your mouth, but when you get called out you weasel away... DO the build Brad, show us what you have.

Before you start calling me a liar you better clean your closet really well.

Hey lair, quit repeating misinformation! How long is it going to take you to comprehend that more work was put into that 681 before I sold it, and that I would not have sold it the way it was when you saw it at that GTG?

Honestly, I don't care how the saw ran months after I delivered it. Go back and analyze the vids of when I delivered it, as compared to the 7900. And then anaylze it agains that same 7900 when EC got done with it. It's entirely possible that the flywheel had slipped and lost ignition timing, since that saw has no key on the flywheel. I warned Jason of this when I sold it to him.

But again, none of this does anything to address the real issue, and that's how EC has treated me since the day I first beat several of his saws. That's what this is really about, not the 681.

 

[blsnelling]

I wasnt talking about you........ lots of people like jumping on the Brad Haters wagon.

And they're mostly all friends of ECs. Coincidence, I don't think so.

 

[blsnelling]

Brad, starting this thread was not a way to let things go. If you keep picking at a scab when it itches you will get an infection.

I have no beef with you, but starting this thread was not one of your smarter moves.

You are exactly right, I know that. I knew it when I did it. But I'm not there yet, where I can let someone wrong me like he has, and continues to do, and just let it go. Not a good witness? Nope, guilty as charged. Maybe one of these days I'll get there. A better man would keep his mouth shut, I'm not there yet.

 

[PB]

You are exactly right, I know that. I knew it when I did it. But I'm not there yet, where I can let someone wrong me like he has, and continues to do. A better man would keep his mouth shut, I'm not there yet.

Brad, if he is as persistent as you say, he won't let up either. Why perpetuate the cycle? It's like seeing someone in an abusive relationship that keeps going back. You can tell them to leave a thousand times but they keep going back.

Someone needs to be the bigger man and let this go. This is not good advertising or good business sense. You never come out the end of the thread any farther ahead, if anything you lose a little credibility each time.

 

[gink595]

Hey lair, quit repeating misinformation! How long is it going to take you to comprehend that more work was put into that 681 before I sold it, and that I would not have sold it the way it was when you saw it at that GTG?

Honestly, I don't care how the saw ran months after I delivered it. Go back and analyze the vids of when I delivered it, as compared to the 7900. And then anaylze it agains that same 7900 when EC got done with it. It's entirely possible that the flywheel had slipped and lost ignition timing, since that saw has no key on the flywheel. I warned Jason of this when I sold it to him.

But again, none of this does anything to address the real issue, and that's how EC has treated me since the day I first beat several of his saws. That's what this is really about, not the 681.

Hey Hack, how come you never answer me when I ask how you fix raising the transfers to high, you dodge the question just like the one I asked about the title of this thread. You remember sitting together at lunch that day and you told me that you went back in and was afraid you raised the transfers to high? And then you said that you were done with it and was going to peddle it becasue you didn't want to replace the cylinder on it because it was quite pricy.

Are you sure you know who banned you on RS, I don't think it was Eric...something to think about!

 

[blsnelling]

Brad, if he is as persistent as you say, he won't let up either. Why perpetuate the cycle? It's like seeing someone in an abusive relationship that keeps going back. You can tell them to leave a thousand times but they keep going back.

Someone needs to be the bigger man and let this go. This is not good advertising or good business sense. You never come out the end of the thread any farther ahead, if anything you lose a little credibility each time.

Again, you are right. I did that for a year. I let his response on RS this week retrigger it. Then when I saw the vid Jason had of the EC 681 compared to the 7900, I was shocked. I fell off the wagon you might say

 

[blsnelling]

Hey Hack, how come you never answer me when I ask how you fix raising the transfers to high, you dodge the question just like the one I asked about the title of this thread. You remember sitting together at lunch that day and you told me that you went back in and was afraid you raised the transfers to high? And then you said that you were done with it and was going to peddle it becasue you didn't want to replace the cylinder on it because it was quite pricy.

Gink, you are a bald-faced liar! I may have discussed the build of that saw with you at that GTG, but I NEVER said I was done with it, and would never have just pawned it onto someone else that way. I would never have sold it slower than a stock saw! I have the numbers from that saw, and know exactly what I did to it. What I did to rectify the situation at the GTG is simply NONE OF YOUR BUSINESS. The bottom line, is it was significantly stronger when I sold it than when you saw it at the GTG.

 

[gink595]

You are exactly right, I know that. I knew it when I did it. But I'm not there yet, where I can let someone wrong me like he has, and continues to do, and just let it go. Not a good witness? Nope, guilty as charged. Maybe one of these days I'll get there. A better man would keep his mouth shut, I'm not there yet.

How did Eric wrong you with this 681? Lets break it down and look at it.

You bought the 681 and did a huge sales promotion for Bailey's by porting it and talking it up, you then found out it wasn't very impressive and was expensive to repair so it you sold it to a trust worthy guy (chucker) for a profit. Jayson is really proud of this saw and boasts about it for months, then he gets a hint that this saw might not be what he thinks and that a stock 681 is a strong runner. So he decides to go to a GTG and runs it against a stock 681 and it equally fast. Eric decided to reach out and help Jayson and tells him to buy a new cylinder and he will port it for free.


So lets think about this, Eric didn't make one penny on this port job, but you feel wronged.....Woodchucker should be upset!
Yes that 681 is stronger than my 7900 from the times I've seen on the watch.

 

[edisto]

Honestly, I don't care how the saw ran months after I delivered it.

Now there's a sales pitch!

Sorry...couldn't resist.

 

[woodgrenade]

I'm reading, but this is all that I am taking away from this thread.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/sShMA85pv8M?fs=1&amp;hl=en_US&amp;rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/sShMA85pv8M?fs=1&amp;hl=en_US&amp;rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[gink595]

Gink, you are a bald-faced liar! I may have discussed the build of that saw with you at that GTG, but I NEVER said I was done with it, and would never have just pawned it onto someone else that way. I would never have sold it slower than a stock saw! I have the numbers from that saw, and know exactly what I did to it. What I did to rectify the situation at the GTG is simply NONE OF YOUR BUSINESS. The bottom line, is it was significantly stronger when I sold it than when you saw it at the GTG.

Your a theiving politician Brad, my wife was sitting there with us when you told US that and can confirm it!

You have no answer for how you fixed it becasue you didn't, you tweaked the timing on it to help it and peddled it.

Believe me I don't want the numbers for that saw, please do not give them to anyone, do everyone the favor on that one and burn them

 

[slipknot]

I would do that in a heartbeat! It's others that refuse.

Im starting to see that.....but you are letting it get to you.....dude...when i get upset like you seem to be.....I like to go play with one of my saws....I know its cold out and snow is everywhere....but I think you should pick a toy out of your toy box and make some cuts...blow off some steam if you know what i mean. I hate stihl cuz everyone and their bro likes them...but dont you have a sweet runnin ms260? I hate how everyone is fighting...this site is supposed to be about sharing info not hetred...i realize your defending yourself and I do feel bad for ya....but I dnt think this thread is going anywhere. It got hijacked....I contributed to it..sorry....but hey did you see that giraffe fight? I thought those were peaceful animals....mean lil buggers arent they!!!

 

[slipknot]

Your a theiving politician Brad, my wife was sitting there with us when you told US that and can confirm it!

You have no answer for how you fixed it becasue you didn't, you tweaked the timing on it to help it and peddled it.

Believe me I don't want the numbers for that saw, please did not give them to anyone, do everyone the favor on that one

C'mon gink its only chainsaws...its not like he slept with your girl friend or wife or whatever ya got.....c'mon guys lets just let it simmer down....enjoy the funny vids and music...I hated rap music until today....country rap is A okay!

 

[WoodChuck'r]

Brad, I guess I can understand your frustration with the fact the certain people won't accept you at Race Saws. If it were me though I just plain wouldn't give a rats ass about who does and does not like me.

I'm not being an ass, but it's obvious that Eric doesn't care for you. There's enough people in this world that don't care for each and everyone of us and vise versa. Almost everyone here knows that Eric doesn't particularily care for you. But why the need to shout it to the world?? Why tell everyone that there's someone who doesn't treat you the way you feel you should be treated??

I'm sure there's enough people on AS who absolutely DESPISE my lame and immature posts that serve no purpose to the chainsaw world whatsoever. Fark'em. That's what I say. They'll talk a bunch of **** an tell me how my posts serve no purpose and other comments alike. I accept the fact they don't care for my being here and I just giggle about it. That's how you should feel about this. Just keep doing what you're doing and try not to be so defensive! No one ever attacked you about this! Threads like this put you and surrounding others in a bad position and you and I both know threads like this are completely unnecessary.

Is it that hard to just know that Copsey doesn't like you and accept it so you can move on??

 

[gink595]

C'mon gink its only chainsaws...its not like he slept with your girl friend or wife or whatever ya got.....c'mon guys lets just let it simmer down....enjoy the funny vids and music...I hated rap music until today....country rap is A okay!

I don't think so...not today. Brad starts these threads and then gets rail roaded and then he feels everyone is picking on him. He did it with Joat also, he asked for this and then is upset when it back fires and pulls the poor me card.

 

[WoodChuck'r]

C'mon gink its only chainsaws...its not like he slept with your girl friend or wife or whatever ya got.....c'mon guys lets just let it simmer down....enjoy the funny vids and music...I hated rap music until today....country rap is A okay!

Not down with the new Dre though eh??

 

[slipknot]

Not down with the new Dre though eh??

nah....too ghetto for me....but its ok if someone else likes it.....im not that predjudice....I do admit i didnt even listen to it.. Im a metal head at heart. This thread has been very diverse..which is good..the big smo could bridge the gap between ppl like me and the thugs...hopefully one day we can all get along.

 

[WoodChuck'r]

nah....too ghetto for me....but its ok if someone else likes it.....im not that predjudice....I do admit i didnt even listen to it.. Im a metal head at heart. This thread has been very diverse..which is good..the big smo could bridge the gap between ppl like me and the thugs...hopefully one day we can all get along.

You ought to listen to it from start to finish a few times. That **** is way catchy dude I think it just may start to grow on you!!