The tank vent on my 5200 is a screw in plug with a duck bill valve attached to it with a foam filter in a small hole on the air filter side. Mine doesn't use a line.
Steve Sidwell
Steve Sidwell
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
Kensie1988
Vintage Saw Maniac
Yes, pro line, I bought some a couple weeks back and they work perfectly
Sent from my E6910 using Tapatalk
How about some more information about this. Maybe part numbers, where to get, ect
Kensie1988
Vintage Saw Maniac
The part number is 530024225, it is the updated version used on the 3400/3700/4000 rear mount, and all of the 6900/7700/8500 mounts. I've seen them on eBay from pro line and chainsawr.com is also selling them, which is where I got them.
Sent from my E6910 using Tapatalk
Sent from my E6910 using Tapatalk
I used some of those a year ago on my 5200 and I thought that they were a little soft and the saw moved to easy. Did you have any problem with them or is it just me .
Kensie1988
Vintage Saw Maniac
They don't feel too soft to me when I have them installed, but I haven't run the saw yet.
Sent from my E6910 using Tapatalk
Sent from my E6910 using Tapatalk
That's a good price chainsawr has them for. I'll have to bookmark that one, if they will fit now. Changed my mount threads in the saw to metric on the 5200. I could install timeserts if I did.
Steve Sidwell
Steve Sidwell
These the ones you were telling me about a few weeks ago?
Kensie1988
Vintage Saw Maniac
I'll try and get a pic of that eagles nest today when out on lake. Had folks wanting that pic on FB.
I wasn’t going to redo this 54cc 3300. Supposed to be running parts saw I bought in pieces with yellow 335 recoil. Just wanted it for the parts for my dads bought new 3300 .
Found few more recoils and those nla pulleys too. 330 3450 380 3750 and 365 3500
I wasn’t going to redo this 54cc 3300. Supposed to be running parts saw I bought in pieces with yellow 335 recoil. Just wanted it for the parts for my dads bought new 3300 .
Found few more recoils and those nla pulleys too. 330 3450 380 3750 and 365 3500
Can see the nest but cant make out the eagles white head in pic. Phone camera just dont zoom in enough.
Beautiful day yeserday considering.
Beautiful day yeserday considering.
Above build done. 3 pulls fired on choke. Now to put a bar chain and test. Type3 later has some things different then dads Type1 that made me pull tank back off for a redo.
Got surprise. I put 16” 325 but someone had put a 3/8 rim. So 16” 3/8 k041 bar it is.
So far running cutting great.
Even though I won’t leave 3/8 set up on it.
Some more parts for guys asking.
Got surprise. I put 16” 325 but someone had put a 3/8 rim. So 16” 3/8 k041 bar it is.
So far running cutting great.
Even though I won’t leave 3/8 set up on it.
Some more parts for guys asking.
I need to find me 1 of these series saws. I sold my husky 350 and this would replace it nicely I think
What numbers of the 3000 saw are the good ones? Which ones are the clamshell type?
Who designed these?
Who designed these?
PP 335, PP 365, PP 330, PP 380, 3300, 3500, 3450, 3750. Anyone else think of any others.
Thank you very muchly
Not the Poulan Pro series, but I do fancy the 1987 3000's. Great for reasonable firewood and such. Basically the performance of an 026.
Man they are beauties brakes and all
I second that
