drf255
BAD CAD
Wanted some opinions on B&C for my new project saw. 026 PRO
Specs
026
44.7 mm bore
Int 76
Ext 102
Transfers 118
Squish .017
(Above specs recommended by Mastermind)
Comp 185 psi
Timing advance .020 keyway.
Saw came with a 20" .325 when I got it.
I have a 18" .325 on my 028S I can flip. I also got a nice 3/8 16" Rollomatic on the way.
My thoughts are to go 16" 3/8 RS chain. I'd have to change the rim sprocket.
If I go 16" 3/8, which sprocket should I go with.
Thanks.
Specs
026
44.7 mm bore
Int 76
Ext 102
Transfers 118
Squish .017
(Above specs recommended by Mastermind)
Comp 185 psi
Timing advance .020 keyway.
Saw came with a 20" .325 when I got it.
I have a 18" .325 on my 028S I can flip. I also got a nice 3/8 16" Rollomatic on the way.
My thoughts are to go 16" 3/8 RS chain. I'd have to change the rim sprocket.
If I go 16" 3/8, which sprocket should I go with.
Thanks.