Anytime I've been paid for something it seems like work. No threat here man, ill stick to messing with mine and my buddies saws. Besides I don't want to pay royalties on others numbers.
Back In The Shop......Now What's On Your Bench????
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
Anytime I've been paid for something it seems like work. No threat here man, ill stick to messing with mine and my buddies saws. Besides I don't want to pay royalties on others numbers.
Ordered straight from cc specialities. 1/8 collet.
gaspipe
Expert Beer Drinker
Tonight's patient...a 577 Shindaiwa. Bad bearings and seals....
They were toast. In go some slick new German FAG manufactured ones...I warmed the cases to 180F, chilled the bearings to 0F. They dropped in with finger pressure
A little Hondabond HT (no gasket in the 577 series saw) seals it up, and we have a freshened up 577 bottom end....time to grind on the jug a bit next.
Mechanic's fuel...
They were toast. In go some slick new German FAG manufactured ones...I warmed the cases to 180F, chilled the bearings to 0F. They dropped in with finger pressure
A little Hondabond HT (no gasket in the 577 series saw) seals it up, and we have a freshened up 577 bottom end....time to grind on the jug a bit next.
Mechanic's fuel...
tree monkey
Addicted to ArboristSite
off the roll 33rs, 9 pin, needs 11 pin
big t double
Addicted to ArboristSite
Being allowed to only issue one "like" per post is stupid.
Jeepsnchainsaws
ArboristSite Operative
Deets066
Firewood hack
Yeah.... Maybe it will cut fasterVery cool but sink it in some white oak, not the same effect
Deets066
Firewood hack
The more I see these piped saws, the more I want one. Just cuz
Jeepsnchainsaws
ArboristSite Operative
I have been hooked, this is my second one on the way, my first one is too much fun!
Deets066
Firewood hack
Making um from nothin... Or can you buy pre-made pieces ?
bikemike
loud pipes save lives
Is that the pipe youbjust built? Very nice and affective. What saw is that? The way it sounds you could run that a whole tank and not worry about overheating
bikemike
loud pipes save lives
Pipes are like meth. Once you have one youl never go without.
Deets066
Firewood hack
Looks like an 880
bikemike
loud pipes save lives
The more i se the tig gun again the more i want one just cause.
bikemike
loud pipes save lives
Yeah i need a pipe for the 026 now or 034. My poulan with a pipe is my go to saw and everyday i want to run a tank of few through it of course with ear protection
bikemike
loud pipes save lives
Hows the lower rod bearing look?Tonight's patient...a 577 Shindaiwa. Bad bearings and seals....
They were toast. In go some slick new German FAG manufactured ones...I warmed the cases to 180F, chilled the bearings to 0F. They dropped in with finger pressure
A little Hondabond HT (no gasket in the 577 series saw) seals it up, and we have a freshened up 577 bottom end....time to grind on the jug a bit next.
Mechanic's fuel...
Jeepsnchainsaws
ArboristSite Operative
Make them from flat cold roll is best, .024" thick is what I've used. No prefab parts.
Jeepsnchainsaws
ArboristSite Operative
Let's see that poulan pipe!
bikemike
loud pipes save lives
Its a pocket bike pipe with a glass filled silencer poulan pro 46cc
