Close up look at a new Dolmar ps6100

[nute19801]

We wont be getting anymore in until late November early December from what I was just told.

 

[exSW]

API doesn't have them available yet, and they will not be offering PHO. But numbers for 18" & 20" in both .325" and 3/8" are in the system. I hear there is a push to eliminate the option of buying PHO for any model. Dolmar/IDN continues to shoot themselves in the foot...

Gee,just what I want to do buy another quality saw with a substandard(by my standard)
bar.Whom do I email to pitch a B!tch?

 

[nute19801]

We had the chance to try one out at the Paul Bunyan Show last weekend. Very smooth. Nice saw to run and seemed to pull a 20" bar nicely but they didn't have any big wood to give it a really good workout.

 

[nute19801]

Just because it comes boxed with a laminate bar doesn't mean it has to leave the saw shop with one.

 

[exSW]

Just because it comes boxed with a laminate bar doesn't mean it has to leave the saw shop with one.

Yeah,but now you're stuck with a bar.

 

[tallguys]

I wouldn't think that having a few bars and chains in a popular size and mount would be all that troubling for most dealers.

 

[Franny K]

A couple more pictures. Am I missing anything that anybody wanted to see? I am going to be boxing this thing back up to ship it out monday morning

Since you have the cylinder off I would like to see a picture of the rod and crank at least in the opening the cylinder's removal creates.

 

[XSKIER]

Reeds on the strato ports... Very innovative!

Like!

 

[nute19801]

1

 

[nute19801]

I checked compression on the other 6100 I have and it is 200psi too. The other gauge we have says 180-190 but its the automotive style with long quick connect hoses.

 

[spike60]

The cylinder bolts come up from the bottom?

 

[SawTroll]

Reeds on the strato ports... Very innovative!

Like!

..or a way to work around some patent?

 

[fastLeo151]

The cylinder bolts come up from the bottom?

Yes, thankfully you can pull the jug with out pulling the tank though

 

[WetGunPowder]

Nice clean saw you have there. Congrats! I'm not overly excited about the Husqy 346 XP style rounded bottom, or the wild thing style starter pawls, or the goofy dawg. At least it doesn't have that cussed outboard clutch! Might it de-throne the legendary MS 361?

Time will tell-Traded a 361 in on a new 6100 today..............

 

[WetGunPowder]

Central is only letting them out with 3/8 20" bar at this point. They couldn't tell me when we would be able to order them with an 18.

Ours from Magneto Power arrived with the 3/8-18 setup. No word on the 3/8-20's.

Too bad cuz we ordered most of them 20"

 

[WetGunPowder]

Gee,just what I want to do buy another quality saw with a substandard(by my standard)
bar.Whom do I email to pitch a B!tch?

With the price of the saw with B&C you can throw the laminate away and put on whatever bar you want and still get one h*ll of a saw!

 

[SawTroll]

Time will tell-Traded a 361 in on a new 6100 today..............

:msp_confused:

 

[XSKIER]

Time will tell-Traded a 361 in on a new 6100 today..............

Ooh... We wish you the best... you might end up needing it, or you might show us a thang or too.

 

[XSKIER]

With the price of the saw with B&C you can throw the laminate away and put on whatever bar you want and still get one h*ll of a saw!

What? Are you approaching echo price for a "pro saw"?

 

[166]

I believe any saw under 62cc has to be supplied with a bar & safety chain factory.