Husqvarna 235 Carb Removal?

[HarleyT]

My brother-in -law wants me to fix his saw, and I have been out of the game for a while, and my work was mainly on Stihl.

My question is: What is the easiest way to remove the carb?


I don't want to spend a lot of time on this little thing, and I am sure lots of you guys have worked on them....

Do I need to go out and dig out some little angled wrenches?

 

[Ozhoo]

There's a screw on the side that lets you remove the "Rear Wall".... a few f bombs help

 

[HarleyT]

OK, that helps a lot.
I have been out in the shop digging out my little wrenches!!!

 

[HarleyT]

There's a screw on the side that lets you remove the "Rear Wall".... a few f bombs help

View attachment 789990

So the rear handle has to drop out of the way?

This **** is why I stick to Stihls...

 

[Ozhoo]

Pretty sure I lowered the tank on the first couple I did, but I don't recall doing it that way recently... through the choke rod hole to get to the one side and remove that plate for the other.

 

[Ozhoo]

I hate 235's and no longer work on them... way too much work for such a pos saw.

 

[HarleyT]

Pretty sure I lowered the tank on the first couple I did, but I don't recall doing it that way recently... through the choke rod hole to get to the one side and remove that plate for the other.

No sorry, I was thinking Stihl again, with the tank in the rear handle.

You are right, a serious pain in the ass!

Thanks for the help!!!