Mastermind Meets The Husqvarna 395XP

[jropo]

Skip 3/8"

wittling with a 36"!!!! LOL. Never thought of that. Just double cut, I just like the handling better.

I bet its major nose heavy, but its something that I could of used a few times.
I do double cut, but I'd like to just power buck through them at times.

 

[parrisw]

I bet its major nose heavy, but its something that I could of used a few times.
I do double cut, but I'd like to just power buck through them at times.

Never run one with anything bigger then a 36" so I'm not sure.

 

[jropo]

Sorry not trying to hijack Randy. I've never uploaded this vid before, just did now. This is the very first saw I ever ported, still got it. Runs ok. Sounds like a dirt bike, stock muffler too!!.

That's my buddy running the saw. I'm the guy with the axe.

[video=youtube_share;voKt-FLEKhM]http://youtu.be/voKt-FLEKhM[/video]

That was a nice one, saw sounds nice!
Log?

 

[Mastermind]

That video made me dizzy Will.

 

[Bowtie]

Cool,, makes good sense,,, I may give that a try,,,, I suppose the grey plastic is cheaper than delrin,,,,,, ehh???

Rick, your ole' 361 is sittin in Randy's shop right now. That should be fun!

 

[parrisw]

That was a nice one, saw sounds nice!
Log?

Thanks. That's what they sound like with about 200psi.

That video made me dizzy Will.

Ya I know. My friend was running the camera.

 

[Mastermind]

Rick, your ole' 361 is sittin in Randy's shop right now. That should be fun!

Well it's in the house still in the box.......the shop is too small for many more saws.

 

[adam32]

Are you sure they were pulling 195 with no popup or combustion chamber work?

I checked the comp myself...about tore my arm off! No popups for sure, I have no idea if they do combustion chamber work. I wouldn't think they do, next time he's here I'll pull a jug and check it.

 

[adam32]

Lack of elevation in Centralia maybe? Not sure what the elevation is there.......alot less that here I suppose.

We checked it at 2600...the saws get run all they way up to 9000.

 

[NORMZILLA44]

What can I say, awesome saw, great work! Jamestown ferry, going to be a hot day in January!

 

[jropo]

How many 394/395's have you done so far?

 

[Ambull]

Videos tomorrow. I'll run this beast against my 066 to see where it stacks up.

I like that sig line..........laughter really is the very best medicine!

Nice job Randy, can't wait to see it run against the 066.

 

[Adirondackstihl]

That cylinder looks great!
The material your using for a mandrel looks like UHMW or MD Nylon. Nice stuff to work with.

 

[Mastermind]

How many 394/395's have you done so far?

This one makes three......

 

[mdavlee]

The stock 394 I had was at 175 and the 395 was at 180 at my house. The base gasket can be left out of them usually to tighten the squish up.

 

[adam32]

Here's one of the Madsen's 395's. 28" log, 34" bar with the rakers down around .040 on square ground.

[video=youtube;aGLHHZXXDDQ]http://www.youtube.com/watch?v=aGLHHZXXDDQ[/video]

 

[Mastermind]

Video is processing...... :msp_thumbup:

 

[Mastermind]

Before.....

[video=youtube;T4Mt6yj_9nI]http://www.youtube.com/watch?v=T4Mt6yj_9nI[/video]

 

[Mastermind]

After............

Well crap.....the video crashed during upload.

Trying it again.

 

[husq2100]

Here's one of the Madsen's 395's. 28" log, 34" bar with the rakers down around .040 on square ground.

[video=youtube;aGLHHZXXDDQ]http://www.youtube.com/watch?v=aGLHHZXXDDQ[/video]

was that a work saw?