Saws over 20 years old

[stipes]

A few of my old ones..

The SP 80 is in the start of being restored...My lasted addition is my Minimac6..Last owner said it dont have any power,,no wonder,,he was trying to pull a 16 inch bar with it!!!!

 

[heimannm]

Hey Bama...(Post #20)

One year ago I had 5 saws, the Strunk for looking at, the Jonsered 2050 for light work, my Jonsered 621 that just failed a bearing, and my Stihl 036.

I got interested in fixing the 621 and getting one old McCulloch like my old saw.

Then I read the "Old Giants" thread...

Well, the rest is pretty interesting.

Mark

 

[AOD]

This should be the "Saws that can buy Beer" thread!

 

[lawnmowertech37]

speaking of old saws im just curious if any you need anything for them ?

 

[ChrisAdam45]

My first and only (so far) saw

 

[gmax]

A pair of "Blitz B300's"

A" Homelite XL 12"

A "Skil 1644"

A "Solo Rex"

 

[ciscoguy01]

Older'n me...

I think anyways... The SuperXL's jumped up and bit me a couple times when I was younger...

 

[litefoot]

Two Macs, a PM700 and a Mac-15. The PM700 is dirty because I just ran it to buck up some Ponderosa pine. I don't usually "collect" old saws (I like to buy runners), but that old Mac-15 was just too "pretty" to pass up. The PM700 is 70cc and the Mac-15 is 80cc.

Here's Solo 655AV runner that I picked up this weekend from a Stihl dealer for less than the price of a trip to Appleby's.

 

[csx7006]

You don't see many of these still working :greenchainsaw: .......Bob










Hey Chowdozer! Were going to have to race the gear drives. Have to take a break for lunch though if the wood is over 48 inches

Hey can i get 1 off of ya?

 

[dt6266]

heres my homies

 

[lh3]

Old Poulan

Here is my contribution.

Cool old saw I think.

 

[pioneerguy600]

Every chainsaw in these picts are over 20 years old, they lik,e to come out and sun themselves sometimes.
Pioneerguy600

 

[stihlloggin]

here's one

 

[parrisw]

One of my oldies. Its a little dirty in this pic, this is just after I got it.

 

[husky455rancher]

only real old saw i own

 

[Modifiedmark]

Lots of nice mature saws posted, thanks all.

For the sake of diversity, I thought it best to show a little bit of the green saws.

Poulan 306A

Poulan S25CVA

 

[Ax-man]

]This is one of my saws that I use for climbing. A Homelite 775 G with a clearing bar that is running 1/2 inch pitch chain.

It does run and work.

I took the pictures after I got it running under it own power.

Larry

 

[pioneerguy600]

only real old saw i own

Was that a 250 or a 200, I remember us talking about it back when you got it but have not heard much about if you got it to run/
Pioneerguy600

 

[pioneerguy600]

]This is one of my saws that I use for climbing. A Homelite 775 G with a clearing bar that is running 1/2 inch pitch chain.

It does run and work.

I took the pictures after I got it running under it own power.

Larry

I have one of those big old Holmelites and I guarantee you I will never use it as a climbing saw, I use a Oleo Mac 950 AFF and now my 026`s for that work. LOL
Pioneerguy600

 

[parrisw]

Lots of nice mature saws posted, thanks all.

For the sake of diversity, I thought it best to show a little bit of the green saws.

Poulan S25CVA

I got a craftsman that's built by poulan that looks excatly like that