The Official "Noodles" Pic and Vid Thread

[The Count]

good stuff for the small farm animals to sit on; or other pets like rats and other rodents.
I didn`t knew about noodling till now....cool !
is it harder on the saw than normal cut ?

 

[The Count]

Made another video of the 064, this time it has an 8 pin sprocket. I've ran about a gallon of mix through the saws and it's really waking up, it's turning 15,000 rpm.

<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/gW3pKVAMfRA?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/gW3pKVAMfRA?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

isn`t the chain a bit loose at 1:25 or so ?
is there a particular adjustment on the saw for noodling that differ from normal cuts ?
just curious; or it got hot and expanded ?
thanks

 

[Adam_MA]

Here's my contributions..

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/jkGWE7mQO90?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/jkGWE7mQO90?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/kknpH76ysnI?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/kknpH76ysnI?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/KLoMokUrvWc?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/KLoMokUrvWc?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Ei1kiRM_fjQ?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Ei1kiRM_fjQ?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/eDsIiIQg0Ps?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/eDsIiIQg0Ps?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[parrisw]

Most of these logs didn't need noodling, and it's mainly some pretty soft pine, but I got a little carried away since I was about the replace the bar and chain anyways:



It all started so innocently. BTW, I am since moved to Amsoil at 60:1(to start) VS the old racing premix for motorbikes at 40:1 that loved to smoke when cold and started to fowl the plug.

I like how the saw backed out of the truck to you.

 

[Stihlman441]

Stock Ozzy 660 noodling Spotted Gum

[video=youtube;jnlGWXyODtY]http://www.youtube.com/watch?v=jnlGWXyODtY[/video]

[video=youtube;aosIl_BO7X8]http://www.youtube.com/watch?v=aosIl_BO7X8[/video]

 

[Stihlman441]

Allmost new Snellerized 660 only had afew tanks through it in Red Gum.

[video=youtube;gym6nQIAIeY]http://www.youtube.com/watch?v=gym6nQIAIeY[/video]

 

[komatsuvarna]

Bump

How bout some Swedish noodles? :msp_rolleyes:

Been raining the last 2 days, so Ive been stuck in the shop pittling around. Sharpened about every chain I had.....yeah, that bored .

Anyways, here's a result from this afternoons boredom. Wood is Beech.

[video=youtube;zIIH4_r_ziQ]http://www.youtube.com/watch?feature=player_profilepage&v=zIIH4_r_ziQ[/video]

 

[Slamm]

Here is the after effects of lotsa noodle cutting.

We could bale it:

Here is the pattern for making firewood out of larger logs, without the hassles and shear inconvenience of traditional wood splitting, LOL.

Sam

 

[gmax]

My solo 655AV is my favorite noodle saw, it just doesn't clog with noodles


<iframe width="420" height="315" src="http://www.youtube.com/embed/1h1tidSQyNg" frameborder="0" allowfullscreen></iframe>

 

[little possum]

Noodle milling

 

[ShaneLogs]

Here is the after effects of lotsa noodle cutting.

We could bale it:

Here is the pattern for making firewood out of larger logs, without the hassles and shear inconvenience of traditional wood splitting, LOL.

Sam

Wow Sam! Looks like A LOT of noodles there! Do you guys use them for fire starters also ?

 

[CRE1992]

Here is a 32" diameter red oak I noodled into quarters so they were easier to manage. Kind of sad no one wanted to mill it. Really nice straight tree.

 

[ChainFinn]

Offtopic, sorry BUT...

whats that tool holder in your dolmars handlebar ?

available? / might retrofit to husky ? / price ?

Thanks in advance.

 

[pioneerguy600]

Offtopic, sorry BUT...

whats that tool holder in your dolmars handlebar ?

available? / might retrofit to husky ? / price ?

Thanks in advance.

This may be of some help, just click on the green link below,

Bailey's - Scrench - Bar Wrench Holder

 

[Mike from Maine]

 

[Pioneer fan]

View attachment 294489

Mildly ported MS290....getting it some...LOL

Disclaimer: Photo courtesy of Justin Cain, taken at the Halifax,Va Heritage Festival

 

[BGE541]

BUMPING this thread as its a good one...

 

[BGE541]

 

[SAWMIKAZE]

Cool thread

 

[the GOAT]

Nice looking 394xp you got there