40cc Shoot Out

[Mastermind]

The players.....

Redmax GZ4000
Dolmar 420
Stihl MS241C

As delivered videos are uploading. We used these saws to limb and buck all the small stuff in a huge old oak yesterday.....several tanks were put through each saw.

We also ran a MS211 alongside these saws.......at this time my gut feelings and Jon's are the same. Our favorite saw in this lineup might surprise you.

Port work will be done on all four after the Central VA GTG......

 

[Mastermind]

The Dolmar......

 

[Mastermind]

The Redmax......

 

[cowroy]

opcorn:

 

[Mastermind]

The Stihl video is uploading still..........it likes about 45 minutes.

 

[andydodgegeek]

Hmmm

 

[Hedgerow]

All stock??
Redmax probably...:msp_mellow:

 

[Mastermind]

All stock??

The Redmax and Dolmar are new......the Stihl is barely used. All are bone stock.

 

[blsnelling]

My experience with the small Redmax saws, is that they're SUPER choked up from the factory, but mod fantastically. The Ryobi, G400, was the strongest 40cc saw I've done.

 

[lly_duramax]

I'll be pulling for the Dolmar.

 

[RandyMac]

They sound like little girls who saw a spider.

 

[deye223]

The players.....



We also ran a MS211 alongside these saws.......at this time my gut feelings and Jon's are the same. Our favorite saw in this lineup might surprise you.

......

doly

 

[Hedgerow]

They sound like little girls who saw a spider.

I was thinking Mud Daubers... But I like to have a little saw around...
"pocket saw"
:msp_sneaky:

 

[blsnelling]

The 420 is an extremely well built pro grade saw with nearly 200 PSI from the factory. They're just a little heavy for their size.

 

[the westspartan]

Dang it!!! This is going to take my couple of minutes goofing off at work and turn it into an hour of periodically checking to see if the rest of the videos have loaded!

 

[Mastermind]

My experience with the small Redmax saws, is that they're SUPER choked up from the factory, but mod fantastically. The Ryobi, G400, was the strongest 40cc saw I've done.

Too much vibs for my taste. I wouldn't care if it cut like a 90cc saw. I do not like em.

They sound like little girls who saw a spider.

The 420 is an extremely well built pro grade saw with nearly 200 PSI from the factory. They're just a little heavy for their size.

Correct........the best runner in the bunch. But no lighter than a 50cc saw.

 

[blsnelling]

Which leads to why I'm anxious to check out the 543XP.

 

[Mastermind]

 

[Guido Salvage]

So do they all outcut Thomas's "box 'o parts"?

 

[fastLeo151]

Randy have you fingered a 421 yet? I just got one and I'm very impressed.