Considering getting a new chainsaw and need some advice. I will use the saw for cutting down 18-26" trees, mostly white oak and sweet gum, and also tackling trees that have been blown over and somewhat rotten.
I have a Husky 353 (50cc and 18" bar) and was wanting a pro model with a little more oomph. I only cut 10-12 trees/year, but would rather get a pro model and not worry about it.
Don't know if I should get a 60cc like the 562XP or MS362 with a 20" bar, or if that would be too much like my 18" 353, and should go bigger like with a 372XP.
I'm thinking that I should get one that I can put a 20" bar on for most of the time, and that could handle a 24" if needed - can't imagine ever needing anything bigger than a 24" bar.
I have a Husky 353 (50cc and 18" bar) and was wanting a pro model with a little more oomph. I only cut 10-12 trees/year, but would rather get a pro model and not worry about it.
Don't know if I should get a 60cc like the 562XP or MS362 with a 20" bar, or if that would be too much like my 18" 353, and should go bigger like with a 372XP.
I'm thinking that I should get one that I can put a 20" bar on for most of the time, and that could handle a 24" if needed - can't imagine ever needing anything bigger than a 24" bar.