Homelite Super 2100 Restoration
- Thread starter leeha
- Start date
Help Support Arborist Forum:
That saw is going to keep
that full wrap. It will be the
next homelite to get done.
Lee
Super job on the saw lee. You do excellent work and cannot wait to see it complete.
Very nice. Keep that half-wrap and maybe Sawtroll will approve it for limbing. Still might lose out on the weight issue... I put a half-wrap from a 2000 on my 2100S to get it by, but it's growing on my me. You need to find a Super bar cover to finish the picture. Are you going to fire it up when you are finished?
Chris B.
Chris, I think the bar cover is correct as
i have another Super 2100 that is in all
original condition with the same cover.
but i have seen the other type as well so
i'm guessing a production change but you
never know.
Lee
i have another Super 2100 that is in all
original condition with the same cover.
but i have seen the other type as well so
i'm guessing a production change but you
never know.
Lee
You could be right. My IPL only shows the later cover, but who really knows. However, the wider cover does match the width of the muffler shield.
You didn't answer my question, are you going to fire it up?
Chris B.
You didn't answer my question, are you going to fire it up?
Chris B.
lesorubcheek
Addicted to ArboristSite
Pretty sure the "other" cover was used with the 7/8" clutch on the Super 2100. Some Super 2100's had the smaller 3/4" and used the cover like this one, which was the same cover as on the 2100, 2100S, and heck, even the 1050.
Dan
Dan
This saw and another i have both
have the 7/8 clutch with this type
cover. So i'm lost i guess.
Lee
have the 7/8 clutch with this type
cover. So i'm lost i guess.
Lee
hoss
Addicted to ArboristSite
That saw looks awsome Lee! Great job. I'll check and see if I have an extra full wrap handle for your saw.
Metals406
Granfodder Runningsaw
Lee, I may have a handle? I'll look for you. I have to work tomorrow, but I'm off Friday through the weekend.
I'll PM you if I find one.
lesorubcheek
Addicted to ArboristSite
Lee, sorry if I confused ya. Just saying what the Rev1. IPL has in it. Nice to hear Bill seconding the finding. Heck, I got a 2100S a little while back that had the Super clutch cover on it! Like Bill said, its easy to interchange things. Who knows.... maybe some of the Supers with the 7/8 clutch came with the cover just like yours. Only have 2 sets of IPLS here to compare. Anycase, you have a heckofa nice saw!
Dan
Dan
Well guys, I thought i would take a brake from
all the Mcculloch 797's i have been working on
and work on a couple 2100 Homelites today.
I had started this project months ago but hit a
dead end looking for a fullwrap handle bar. Well
i finally found one a couple months ago. Today i
finished the decals and cleaned up this nice 40"
cannon roller nose and fitted it with 404 skip full
chisel. Got it running and seems to run well. Next
will be a video when i know the decals a set up.
Nice to have another project done.
Hope everyone enjoyed the thread.
Lee
all the Mcculloch 797's i have been working on
and work on a couple 2100 Homelites today.
I had started this project months ago but hit a
dead end looking for a fullwrap handle bar. Well
i finally found one a couple months ago. Today i
finished the decals and cleaned up this nice 40"
cannon roller nose and fitted it with 404 skip full
chisel. Got it running and seems to run well. Next
will be a video when i know the decals a set up.
Nice to have another project done.
Hope everyone enjoyed the thread.
Lee
That thing looks awesome Lee. is that the one that was on the very top shelf? I cannot wait to hear it and see it in the wood. I'm excited for my 2100 also.
lesorubcheek
Addicted to ArboristSite
Incredible machine Lee 
. Don't get any nicer than this. BTW WM, did you have luck getting the idle problem resolved?
Dan
. Don't get any nicer than this. BTW WM, did you have luck getting the idle problem resolved? Dan
Incredible machine Lee
Dan
Yes its been resolved...Took a little trip to Lee's part of the world.
lesorubcheek
Addicted to ArboristSite
Sounds great WM! Mind if I ask what you had to do to solve it? The couple I've fooled with have been OK, but its always good to know what to look out for on these tough to solve situations.
Dan
Dan
